P0528 Terasic Technologies Inc, P0528 Datasheet - Page 29

• Manufacturer Part Number: P0528
• Description: BOARD DEV DE1 ALTERA
• Manufacturer: Terasic Technologies Inc
• Type: FPGAr

Specifications of P0528

• Contents: DE1 Board, Power Supply, USB Cable, Plastic cover and software
• For Use With/related Products: Cyclone II 2C20
• For Use With: P0033 - BOARD ADAPTER HSMC TO GPIOP0006 - BOARD ADAPTER THDB-SUMP0001 - MODULE DIGITAL CAMERA 5MP (D5M)P0307 - KIT DEV 4.3" LCD TOUCH PANEL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DE1

DE1 User Manual
There are 27 user-controllable LEDs on the DE1 board. Eighteen red LEDs are situated above the
th
18 toggle switches, and eight green LEDs are found above the pushbutton switches (the 9
green
LED is in the middle of the 7-segment displays). Each LED is driven directly by a pin on the
Cyclone II FPGA; driving its associated pin to a high logic level turns the LED on, and driving the
pin low turns it off. A schematic diagram that shows the pushbutton and toggle switches is given in
Figure 4.4. A schematic diagram that shows the LED circuitry appears in Figure 4.5.
A list of the pin names on the Cyclone II FPGA that are connected to the toggle switches is given in
Table 4.1. Similarly, the pins used to connect to the pushbutton switches and LEDs are displayed in
Tables 4.2 and 4.3, respectively.
Figure 4.4. Schematic diagram of the pushbutton and toggle switches.
27