KP-FSD2 Panduit Corp, KP-FSD2 Datasheet - Page 818

• Manufacturer Part Number: KP-FSD2
• Description: KIT FERRULE INS DIN AWG22-14
• Manufacturer: Panduit Corp
• Series: Pan-Term®r
• Type: Ferrule Kitr

Specifications of KP-FSD2

• Kit Type: Ferrule - Wire End
• Values: 400 pcs - Assorted Insulated 22 ~ 14 AWG Ferrules
• Where Used: To terminate stranded wire for insertion into terminal blocks
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Management
Identification
Accessories
Connectors
Connectors
& Write-On
Protection
Grounding
Pre-Printed
Cable Ties
Terminals
Permanent
Solutions
Overview
Steel Ties
Lockout/
& Safety
Stainless
Raceway
Abrasion
Labeling
Systems
Markers
Tagout
System
Surface
Wiring
Power
Labels
Index
Cable
Cable
D3.32
Duct
E5.
B1.
B2.
B3.
C1.
C2.
C3.
C4.
D1.
D2.
D3.
E1.
E2.
E3.
E4.
A.
F.
Crimping Guidelines for Panduit
1. Select the proper Panduit compression
• The proper conductor
3. Select the proper crimping die and
Use crimping tools and dies that provide a UL Listed
and/or CSA Certified electrical termination, to assure
a safe and reliable connection.
Many Panduit compression connectors are UL
Listed and CSA Certified when crimped with Panduit
and specified competitor crimping tools and dies.
These tools and dies are listed in the tool charts* in
this catalog. Panduit crimping tools and dies to be
used with each connector are also listed on the
installation instructions included with Panduit product
* See tool charts on pages D3.56 – D3.94.
size and type to be used
with each connector can
also be found in the
installation instructions
included with Panduit
product packaging and
in the tool charts* in
this catalog
connector for the conductor type and
size being used.
crimping tool to be used with
the connector.
• Panduit compression connectors are
identified with the proper conductor size and
conductor type marked on the tongue or
barrel of the connector
packaging.
Panduit compression connectors are
color-coded and marked with Panduit and
specified competitor die index numbers.
Select the proper crimping die to be used
by matching the color code and die index
number marked on the connector to the
same markings on the crimping die.
ELECTRICAL SOLUTIONS
®
Pan-Lug
• On the Panduit product
• On the installation instructions
• In the tool charts* in
Insert the conductor into the barrel of the connector.
The conductor should stop against the end of the
barrel of the lug, or wire stop in the butt splice, upon
4. Crimp the connector.
Review the installation instructions included with the
Panduit product packaging or the tool charts* for the
proper number of crimps to be placed in the
connector. Make the first crimp in the barrel nearest
2. Strip the conductor to the proper strip
Make sure the conductor is not stripped too long,
which would result in exposed wire between the
barrel of the connector and the cable insulation.
Make sure the conductor is not stripped too short,
which would result in a less than complete contact
area with the connector when the conductor is
inserted in the barrel.
Do not nick or cut strands of conductor during
crimping, which would result in a less than premium
conductor termination.
packaging label or
included with Panduit
product packaging or
this catalog
length. As specified:
™
Identify
Compression Lugs and Splices
the barrel. Use the color-coded or knurled
band markings on the barrel of the
connector to evenly space the placement
of the crimps in the barrel.
When properly crimped, the die index
number engraved in the crimping die will be
embossed into the barrel of the connector.
The crimp should be placed in the connector
so the die index number can be easily read
when the connector is installed.
complete insertion of the conductor in
the barrel. Some lugs are offered with
inspection windows that provide visual
inspection of the complete
conductor insertion.
from corrosion.
Make sure conductor strands are free
the tongue of the lug, or wire
stop in a butt
splice, and make
successive
crimps in the
barrel working
towards the
conductor entry at the end of