MT90222 ZARLINK [Zarlink Semiconductor Inc], MT90222 Datasheet - Page 46
![no-image](/images/no-image-200.jpg)
MT90222
Manufacturer Part Number
MT90222
Description
4/8/16 Port IMA/TC PHY Device
Manufacturer
ZARLINK [Zarlink Semiconductor Inc]
Datasheet
1.MT90222.pdf
(155 pages)
- Current page: 46 of 155
- Download datasheet (920Kb)
3.2.6
A link is declared out of IMA Frame (LIF) synchronization state when the IFSM goes in HUNT mode for ’gamma +2’
frames after it was in SYNC state. Loss of IMA Frame (LIF) and end of LIF can optionally generate an interrupt (IRQ).
This condition is latched in bits 2 and 10 of the IRQ Link Status (0x0435-0x0444) registers. Refer to section 6.2.2
IRQ Link Status and IRQ Link Enable Registers for more details.
The LIF status bit reports the current condition of the IMA Frame State Machine at the time it is read.
3.2.7
The MT90222/3/4 scans each incoming cell received for the Filler Cell Indication code. Filler cells are written to
external RAM to keep the IMA frame aligned. They are automatically discarded after being read from the external
RAM by the recombiner.
3.2.8
Each incoming ICP cell received is scanned for the Stuff Indication Code. Stuff cells are inserted at the transmit end
as two identical and consecutive ICP cells with the Link Stuff Indication Bits set as defined in the IMA specification.
The MT90222/3/4 automatically discards one of the two Stuff cells without storing it in external RAM. The other is
kept and processed as a regular ICP cell. IMA Frame synchronization is maintained for all cases (except case 7,
O-19 optional requirements) as described in Figure 20 of the IMA Specification.
3.2.9
An internal buffer is implemented to collect cells from the RX TDM links for analysis by the software. This storage
unit has a circular buffer for each link and contains up to three cells per link. The buffer can selectively collect:
•
•
•
•
The type of cells collected is defined in the RX Cell Type RAM (0x0100 and 0x0101) registers. A status bit and a
maskable IRQ alerts the software when a new cell is waiting for processing in a specific link. These are found in the
IRQ Link Status (0x0435-0x0444) and Enable (0x0445-0x0454) registers.
Software can directly access the cells in the RX buffer through a two-cell-wide access window using RX IMA ICP
Cell (0x0800 - 0x0BFF). This access window can be advanced, one cell at a time, by issuing a command to move
the internal pointer to the next cell. Since the window accesses two cells, the last processed cell can be accessed
at the window’s base address and the new cell at the base address plus 0x20.
The RX Cell Level FIFO Status (0x0106) register is used to read the level of any of the 16 RX ICP Cell buffers. A
’0’ in this register signifies that no new cell has been received. A ’2’ indicates the possibility that one or more cells
have been missed (overflow condition).
The cell in the last entry of the circular buffer is a temporary buffer (scratch pad). If, for example, the Cell FIFO level
is 2, it is constantly overwritten by any new valid incoming cell.
When the level is 0, the cell that is at the window’s base address is never overwritten as is kept for reference.
The RX Cell Buffer Increment Read Pointer (0x0105) register is used to advance the access window by 1 cell at
a time. Upon the command, the Buffer level is decreased by 1. When the level reaches 0, the window is not
advanced anymore.
all valid cells received on a RX TDM port
all valid ICP cells
all valid ICP cells which contain new information (as indicated by the SCCI field, valid only when the link is in
IMA mode)
no cells
Loss of IMA Frame (LIF) Synchronization
Filler Cell Handling
Stuff Cell Handling
Received ICP Cell Buffer
Zarlink Semiconductor Inc.
MT90222/3/4
46
Data Sheet
Related parts for MT90222
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![SL1430](/images/manufacturer_photos/0/7/727/zarlink_semiconductor_tmb.jpg)
Part Number:
Description:
Zarlink Semiconductor Inc [TV IF PREAMPLIFIER]
Manufacturer:
Zarlink Semiconductor
Datasheet:
![MT312C](/images/no-image3.png)
Part Number:
Description:
Satellite Channel Decoder
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![MSC60028/IG/DP2S](/images/no-image3.png)
Part Number:
Description:
Power Factor Controller
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![P10C68-](/images/no-image3.png)
Part Number:
Description:
CMOS/SNOS NVSRAM HIGH PERFORMANCE 8 K x 8 NON-VOLATILE STATIC RAM
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL2009KG](/images/no-image3.png)
Part Number:
Description:
Dual stage IF amplifier for cable tuners
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL2101C](/images/no-image3.png)
Part Number:
Description:
Synthesized Broadband Converter with Programmable Power
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL2150KG](/images/no-image3.png)
Part Number:
Description:
Cable Tuner Front End LNA with AGC
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL2150LH2S](/images/no-image3.png)
Part Number:
Description:
Front End Power Splitter with AGC
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL2524HP](/images/no-image3.png)
Part Number:
Description:
1.3GHz Dual Wideband Logarithmic Amplifier
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL2610IG](/images/no-image3.png)
Part Number:
Description:
Wide Dynamic Range Image Reject MOPLL
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL1451NADP](/images/no-image3.png)
Part Number:
Description:
WIDEBAND PLL FM DETECTOR FOR SATELLITE TV
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL1452NAMP](/images/no-image3.png)
Part Number:
Description:
WIDEBAND LINEAR FM DETECTOR FOR SATELLITE TV
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL161](/images/no-image3.png)
Part Number:
Description:
WIDEBAND LOG IF STRIP AMPLIFIER
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL1613CDP](/images/no-image3.png)
Part Number:
Description:
WIDEBAND LOG IF STRIP AMPLIFIER
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL1640](/images/no-image3.png)
Part Number:
Description:
THIS DOCUMENT IS FOR MAINTENANCE PURPOSES ONLY AND IS NOT RECOMMENDED FOR NEW DESIGNS
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet: