HYB18M1G160BF-6 QIMONDA [Qimonda AG], HYB18M1G160BF-6 Datasheet - Page 15

• Manufacturer Part Number: HYB18M1G160BF-6
• Description: 1-Gbit x16 DDR Mobile-RAM
• Manufacturer: QIMONDA [Qimonda AG]

2.2.2.2
DRAM devices store data as electrical charge in tiny capacitors that require a periodic refresh in order to retain the stored
information. This refresh requirement heavily depends on the die temperature: high temperatures correspond to short refresh
periods, and low temperatures correspond to long refresh periods.
The DDR Mobile-RAM is equipped with an on-chip temperature sensor which continuously senses the actual die temperature
and adjusts the refresh period in Self Refresh mode accordingly. This makes any programming of the TCSR bits in the
Extended Mode Register obsolete. It also is the superior solution in terms of compatibility and power-saving, because
• it is fully compatible to all processors that do not support the Extended Mode Register
• it is fully compatible to all applications that only write a default (worst case) TCSR value, e.g. because of the lack of an
• it does not require any processor interaction for regular TCSR updates
2.2.2.3
The drive strength of the DQ output buffers is selectable via bits A5 and A6. The “full drive strength” (default) is suitable for
heavier loaded systems. The “half drive strength” is intended for lightly loaded systems or systems with reduced performance
requirements. For systems with point-to-point connection, a “quarter drive strength” is available.
strengths are included in this document.
Rev.1.0, 2007-03
10242006-Y557-TZXW
external temperature sensor
Temperature Compensated Self Refresh (TCSR) with On-
Chip Temperature Sensor
Selectable Drive Strength
15
I
-
V
HY[B/E]18M1G16[0/1]BF
1-Gbit DDR Mobile-RAM
curves for full and half drive
Data Sheet