mc9s12ne64 Freescale Semiconductor, Inc, mc9s12ne64 Datasheet - Page 181

• Manufacturer Part Number: mc9s12ne64
• Description: Hcs12 Microcontrollers Microcontroller
• Manufacturer: Freescale Semiconductor, Inc

Chapter 6
Timer Module (TIM16B4CV1)
6.1
The basic timer consists of a 16-bit, software-programmable counter driven by a seven-stage
programmable prescaler.
This timer can be used for many purposes, including input waveform measurements while simultaneously
generating an output waveform. Pulse widths can vary from microseconds to many seconds.
This timer contains 4 complete input capture/output compare channels IOC[7:4] and one pulse
accumulator. The input capture function is used to detect a selected transition edge and record the time.
The output compare function is used for generating output signals or for timer software delays. The 16-bit
pulse accumulator is used to operate as a simple event counter or a gated time accumulator. The pulse
accumulator shares timer channel 7 when in event mode.
A full access for the counter registers or the input capture/output compare registers should take place in
one clock cycle. Accessing high byte and low byte separately for all of these registers may not yield the
same result as accessing them in one word.
6.1.1
The TIM16B4CV1 includes these distinctive features:
6.1.2
Stop:
Freeze:
Wait:
Normal:
Freescale Semiconductor
•
•
•
•
Four input capture/output compare channels.
Clock prescaling.
16-bit counter.
16-bit pulse accumulator.
Introduction
Features
Modes of Operation
Timer is off because clocks are stopped.
Timer counter keep on running, unless TSFRZ in TSCR (0x0006) is set to 1.
Counters keep on running, unless TSWAI in TSCR (0x0006) is set to 1.
Timer counter keep on running, unless TEN in TSCR (0x0006) is cleared to 0.
MC9S12NE64 Data Sheet, Rev. 1.1
181