S1D13700F01 Epson Electronics America, Inc., S1D13700F01 Datasheet - Page 69

• Manufacturer Part Number: S1D13700F01
• Description: Embedded Memory Graphics Lcd Controller
• Manufacturer: Epson Electronics America, Inc.

Epson Research and Development
Vancouver Design Center
10.3.4 Gray Scale Register
GRAYSCALE
bits 1-0
Hardware Functional Specification
Issue Date: 2005/12/13
REG[20h] Bit-Per-Pixel Select Register
Address = 8020h
7
6
Default = 00h
Note
Note
The GRAYSCALE command selects the gray scale depth, in bits-per-pixel (bpp), when
indirect addressing is used. The values from REG[20h] are passed as parameters when the
GRAYSCALE command is issued. For further information on the GRAYSCALE
command, see Section 11.1.12, “GRAYSCALE” on page 76.
Bit-Per-Pixel Select bits [1:0]
These bits select the bit-per-pixel mode as follows. If the CGRAM is used (includes
CGRAM1 and CGRAM2), only 1 bpp is supported.
When a graphics screen and a graphics screen with Gray Scale enabled are overlaid,
both layers must be configured for the same color depth. For example, if the first layer is
2 bpp, the second layer must also be set for 2 bpp.
The horizontal character size (REG[01h] bits 3-0) must be set to 7h and the Horizontal
Pixel Scroll bits (REG[1Bh] bits 2-0) must be set to 0.
5
REG[20h] bits 1-0
Table 10-10 Bit-Per-Pixel Selection
n/a
00
01
10
11
4
Revision 4.05
Bits-Per-Pixel
3
Reserved
1
2
4
2
Bit-Per-Pixel Select bits 1-0
1
Read/Write
X42A-A-002-04
S1D13700F01
0
Page 69