S1D13700F01 Epson Electronics America, Inc., S1D13700F01 Datasheet - Page 61

• Manufacturer Part Number: S1D13700F01
• Description: Embedded Memory Graphics Lcd Controller
• Manufacturer: Epson Electronics America, Inc.

Epson Research and Development
Vancouver Design Center
bits 3-0
bit 7
bits 3-0
Hardware Functional Specification
Issue Date: 2005/12/13
REG[15h] Cursor Width Register
Address = 8015h
REG[16h] Cursor Height Register
Address = 8016h
Cursor Mode
7
7
6
6
Default = 00h
Default = 00h
Note
Note
Cursor Width (CRX) bits[3:0]
These bits specify the width (or horizontal size) of the cursor, in pixels from the character
origin (see Figure 10-7 “Cursor Size and Position,” on page 60).
Cursor Mode (CM)
This bit determines the cursor mode. When graphics mode is selected, this bit must be set
to 1.
When this bit = 0, an underscore cursor ( _ ) is selected.
When this bit = 1, a block cursor (
Cursor Height (CRY) bits [3:0]
For an underscore cursor (REG[16h] bit 7 = 0), these bits set the location of the cursor, in
lines from the character origin (see Figure 10-7 “Cursor Size and Position,” on page 60).
For a block cursor (REG[16h] bit 7 = 1), these bits set the height (or vertical size) of the
cursor, in lines from the character origin (see Figure 10-7 “Cursor Size and Position,” on
page 60).
The cursor width must be less than or equal to the horizontal character size.
The vertical cursor size must be less than or equal to the vertical character size.
n/a
REG[15h] bits 3-0 = cursor width in pixels - 1
REG[16h] bits 3-0 = cursor height in lines - 1
(REG[16h] bits 3-0 <= REG[01h] bits 3-0)
(REG[16h] bits 3-0 <= REG[02h] bits 3-0)
n/a
5
5
4
4
Revision 4.05
) is selected.
3
3
Cursor Height bits 3-0
2
2
Cursor Width bits 3-0
1
1
Read/Write
Read/Write
X42A-A-002-04
S1D13700F01
0
0
Page 61