MD3331-D64-V3-X SanDisk, MD3331-D64-V3-X Datasheet - Page 28

• Manufacturer Part Number: MD3331-D64-V3-X
• Manufacturer: SanDisk
• Type: Flash Diskr

Specifications of MD3331-D64-V3-X

• Density: 64MByte
• Operating Supply Voltage (typ): 3.3V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Package Type: FBGA
• Mounting: Surface Mount
• Pin Count: 69
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.5V
• Operating Supply Voltage (max): 3.6V
• Programmable: Yes
• Lead Free Status / Rohs Status: Not Compliant

To exit Deep Power-Down mode, perform the following sequence:
•
•
Applications that require both Deep Power-Down mode and boot detection require BIOS support to
ensure that Mobile DiskOnChip Plus exits from Power-Down mode prior to the expansion ROM
scan. Similarly, applications that use Mobile DiskOnChip Plus as a boot ROM must ensure that the
device is not in Deep Power-Down mode before reading the boot vector/instructions, either by
pulsing RSTIN# to the asserted state and waiting for the BUSY# output to be negated, or by
entering Reset mode via software.
28
Read four times from address 1FFFH. The data returned is undefined. (This option is valid for
both standard and multiplexed interfaces).
Perform a single read cycle from the Programmable Boot Block with an extended access time
and address hold time as specified in Section 10.4.1. The data returned will be correct.
Data Sheet, Rev. 1.8
Mobile DiskOnChip Plus 16/32MByte
95-SR-000-10-8L