MD3331-D64-V3-X SanDisk, MD3331-D64-V3-X Datasheet - Page 17

• Manufacturer Part Number: MD3331-D64-V3-X
• Manufacturer: SanDisk
• Type: Flash Diskr

Specifications of MD3331-D64-V3-X

• Density: 64MByte
• Operating Supply Voltage (typ): 3.3V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Package Type: FBGA
• Mounting: Surface Mount
• Pin Count: 69
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.5V
• Operating Supply Voltage (max): 3.6V
• Programmable: Yes
• Lead Free Status / Rohs Status: Not Compliant

The following abbreviations are used:
IN
ST
OD
R8
R
Note: For forward compatibility with future DiskOnChip 7x10 FBGA products, additional pads are
17
RSRVD
Signal
VSS
-
-
required. Please refer to Application Note AP-DOC-067, Preparing your PCB Footprint for
the DiskOnChip BGA Migration Path, for detailed information.
Standard (non-Schmidt) input
Schmidt Trigger input
Open drain
Nominal 22 KΩ pull-up resistor, enabled only for 8-bit interface mode (IF_CFG input is 0)
3.7 MΩ nominal pull-up resistor
E2, E3, E4, E7,
F2, F3, F7, G2,
C3, C7, C8,
D2, D3, D8,
Other. See
Ball No.
Figure 3
G3, J9
K6
M
A
Input
Type
-
-
-
-
-
Ground. All VSS balls must be connected.
Reserved signal that is not connected internally.
Note: Future DiskOnChip devices will use this pin as a clock input. To be
forward compatible, this pin can already be connected to the system CLK or
to VCC when the clock input feature is not required.
Reserved signal that is not connected internally and must be
left floating to guarantee forward compatibility with future
products. It should not be connected to arbitrary signals.
Mechanical. These balls are for mechanical placement, and
are not connected internally.
Alignment. This ball is for device alignment, and is not
connected internally.
Data Sheet, Rev. 1.8
Mechanical
Reserved
Description
Mobile DiskOnChip Plus 16/32MByte
95-SR-000-10-8L
Supply
Signal
Type