CVM1-PA208 Omron, CVM1-PA208 Datasheet - Page 88

• Manufacturer Part Number: CVM1-PA208
• Description: CV/CVM1 POWER SUPPLY, AC
• Manufacturer: Omron

Specifications of CVM1-PA208

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3-7
3-7-1 I/O Unit Wiring Precautions
72
Wiring I/O Units
Wiring I/O Units
!
WARNING
!
Caution
Note
Connect the I/O Devices to the I/O Units using AWG 22 lead wire (cross-section-
al area: 0.3 mm
(cross-sectional area: 0.3 to 0.75 mm
minals have screws with 3.5-mm diameter heads and self-raising pressure
plates. Connect the lead wires to the terminals as shown. Tighten the screws to a
torque of 0.8 N • m.
Attach solderless type (crimp) terminals to the ends of the lead wires. Use termi-
nals having the dimensions shown in the following diagram.
Always attach crimp terminals to the wires to ensure proper connection.
Connecting loose wires can cause fires.
Abide by the following precautions when wiring the I/O Units. Failure to abide by
these precautions my cause faulty operation or damage to the Unit.
• Be sure that no wire clippings or other foreign materials enter the Units when
• Recheck all wiring before supplying power to the system.
• Recheck terminal blocks before mounting them to the Unit.
7 mm max.
Temperature Controller
Data Link Unit
Remote I/O Master Unit
I/O Link Unit
Controller Link Unit
1. Putting I/O lines and high-tension lines or power lines in the same duct or
wiring.
conduit may cause the I/O lines to be affected by noise. This may cause a
malfunction in the Unit or may damage the Unit or I/O devices.
Unit
2
) for 19-terminal terminal blocks and AWG 22 to 18 lead wire
CV500-TDL21
3G2A5-RM001-(P)EV1
C500-RM201
3G2A5-LK010-(P)E
CV500-CLK21
Model
2
) for 10-terminal terminal blocks. The ter-
7 mm max.
0.5
0.7
0.3
0.6
0.3
Consumption (A)
Section
3-7