CVM1-PA208 Omron, CVM1-PA208 Datasheet - Page 56

• Manufacturer Part Number: CVM1-PA208
• Description: CV/CVM1 POWER SUPPLY, AC
• Manufacturer: Omron

Specifications of CVM1-PA208

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Display Modes
40
Rack Components
The following diagrams illustrate the four possible modes. The current mode is
indicated by the location of the point on the display.
Mode 1
Mode 1 normally displays the address of the first word on each Rack. The follow-
ing example illustrates the mode 1 display for a given Rack.
(In this case, the first word allocated is CIO 0036.)
During online I/O Unit replacement, the slot number of the Unit that can be repla-
ced is displayed. (In this case, the Unit in slot number 5 can be replaced.)
Mode 2
Mode 2 indicates the operating status of the CPU as well as the rack number.
Indicates mode 1
Indicates the CPU is in the RUN mode, a non-fatal error has occurred, a
Programming Device is connected, and the rack number is 2.
Indicates the rack number
Indicates whether or not Programming Devices are connected.
Note Only one Programming Device can be connected to the CPU and I/O Interface
Indicates mode 2
Indicates the error status of the CPU.
Indicates the operating status of the CPU.
: A Programming Device is connected to the CPU or to an I/O Interface Unit.
: No Programming Device is connected to the CPU or to an I/O Interface Unit.
: A fatal error has occurred.
: A non-fatal error has occurred.
: No error has occurred.
: The CPU is operating.
: The CPU has stopped.
Note This display will read “0000” if the I/O table hasn’t been registered or
Units for each PC, but three additional Programming Devices can be connected
to the SYSMAC BUS/2 Slave Racks.
an error occurred during I/O table registration.
Word
36
16
-pt
.
I/O
Word
37
Indicates slot number being replaced.
Indicates mode 1.
Indicates online replacement.
16
-pt
.
I/O
Word
38
Section
2-4