CVM1-PA208 Omron, CVM1-PA208 Datasheet - Page 114

• Manufacturer Part Number: CVM1-PA208
• Description: CV/CVM1 POWER SUPPLY, AC
• Manufacturer: Omron

Specifications of CVM1-PA208

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5-3-1 Data Output to AR Area
5-3-2 Online Replacement Procedure
98
I/O Unit Online Replacement
CV500-IC101/IC201/IC301
I/O Control Unit
!
Display
Caution
1, 2, 3...
CV500-II101/II201
I/O Interface Unit
The I/O online replacement conditions can be read at the display of an I/O Con-
trol Unit or I/O Interface Unit mounted on that Rack.
During online replacement, the I/O online replacement conditions are output to
word A399 in the AR Area, as shown in the following table.
Word A399: I/O Online Replacement Conditions
Use version 2.0 or later of the Programming Console for the CVM1D. Online Unit
replacement is not supported by and error messages unique to the CVM1D will
not be displayed with earlier versions.
A399
1. Connect the CVM1-PRS21-EV1 Programming Console to the Duplex Unit,
2. Bring up the Programming Console’s initial screen.
3. Read the display for creating the I/O table.
Word
and prepare an I/O Unit of the same model as the one to be replaced.
CLR
FUN
00 to 07
08 to 11
12 to 13
14
15
Bits
SHIFT
MONTR
Slot number (Rack position) of replaced Unit: 00 to 09 (2 digits
BCD)
Slot number (Rack) of replaced Unit: 0 to 7 (1 digit BCD)
Not used. (Reserved for system.)
Data contents of I/O Units
other than replaced Unit.
I/O online replacement status
CH
Display contents
I/O Table
0:Create
1:Compare
2:Replace I/O
000000 PRG
Output contents
Slot number of replacement
Mode 1
Rack
0: Clear
1: Save
0: Not I/O online replacement
1: I/O online replacement
Section
5-3