QB-MINI2-EE NEC, QB-MINI2-EE Datasheet - Page 74

• Manufacturer Part Number: QB-MINI2-EE
• Description: EMULATOR, PROGRAMMER, MINICUBE2
• Manufacturer: NEC
• Type: Debug Emulatorr

Specifications of QB-MINI2-EE

• Svhc: No SVHC (18-Jun-2010)
• Mcu Supported Families: MINICUBE2
• Silicon Family Name: V850, 78K0R, 78K0S
• Ic Product Type: On-Chip Debug Emulator
• Kit Contents: MINICUBE2, USB Cable, Target Cable, 78K0-OCD Board
• Features: On-Chip Debugging, Flash Memory Programming,

74
(4) Connecting the target system
Remark
Target system
Target system
Connect MINICUBE2 to the target system as shown in Figure 4-20. Select a 10- or 16-pin target cable
according to the target system circuit (refer to Remark below).
Perform connection before the power to the target system is turned on
Caution Connect the 78K0-OCD board to the target cable so that pin 1 position (▲) on each side
Figure 4-23. With 10-Pin Connector
Connect the 78K0-OCD board and the 10-/16-pin target cable as shown below. Do not connect both
the 10-pin target cable and 16-pin target cable.
With 10-pin cable: Connect CN2 on the 78K0-OCD board to the 10-pin target cable (Figure 4-23).
With 16-pin cable: Connect CN3 on the 78K0-OCD board to the 16-pin target cable (Figure 4-24).
match.
CHAPTER 4
Figure 4-22. Connecting MINICUBE2 to Target System
10-/16-pin target cable
10-/16-pin target cable
HOW TO USE MINICUBE2 WITH 78K0 MICROCONTROLLER
User’s Manual U18371EJ1V0UM
Figure 4-24. With 16-Pin Connector
78K0-OCD
78K0-OCD
board
board
MINICUBE2
MINICUBE2