QB-MINI2-EE NEC, QB-MINI2-EE Datasheet - Page 15

• Manufacturer Part Number: QB-MINI2-EE
• Description: EMULATOR, PROGRAMMER, MINICUBE2
• Manufacturer: NEC
• Type: Debug Emulatorr

Specifications of QB-MINI2-EE

• Svhc: No SVHC (18-Jun-2010)
• Mcu Supported Families: MINICUBE2
• Silicon Family Name: V850, 78K0R, 78K0S
• Ic Product Type: On-Chip Debug Emulator
• Kit Contents: MINICUBE2, USB Cable, Target Cable, 78K0-OCD Board
• Features: On-Chip Debugging, Flash Memory Programming,

White
Blue
Orange
Green
Yellow
Red
Illumination
Mode LED
(3) USB interface connector
(4) Target interface connector
(5) Mode LED
Color
-
This is a connector used to connect MINICUBE2 with the host machine, via a USB cable.
A USB 2.0 compliant mini-B connector (UX60A-MB-5ST: Made by Hirose Electric Co., Ltd.) is employed.
This is a connector used to connect MINICUBE2 with the target system, via a 16-pin target cable. Connect
the 78K0-OCD board for debugging a 78K0 microcontroller. To prevent the 78K0-OCD board from being
inserted by mistake, pin 11 is removed at shipment.
Since this connector is compatible with 16-core 2.54 mm pitch general-purpose connectors (female), a
commercially available cable can be substituted.
The appearance of the mode LED changes according to the status of hardware and software, as shown in
Table 2-3.
Flashing
Glowing
Glowing
Flashing
Glowing
Flashing
Glowing
Flashing
Glowing
Flashing
Extinguished
Glowing
Appearance
CHAPTER 2
Not
connected
Connected
The illumination mode is entered when MINICUBE2 is connected to a USB interface and 15
seconds or longer have elapsed. This mode is also entered when the debugger is terminated
normally.
Connection
USB
Table 2-3. Mode LED Status
Not detected
Not detected
Detected
User’s Manual U18371EJ1V0UM
Target VDD
NAMES AND FUNCTIONS OF HARDWARE
Detection
Not yet started
Not yet started
Not yet started
A debugger for V850 microcontrollers has been started and
CPU is in the break mode.
A debugger for V850 microcontrollers has been started and
the CPU is running, or a program is being downloaded.
A debugger for 78K0 microcontrollers has been started and
the CPU is in the break mode.
A debugger for 78K0 microcontrollers has been started and
the CPU is running, or a program is being downloaded.
A debugger for 78K0S microcontrollers has been started and
the CPU is in the break mode. The QB-Programmer has
been started and is waiting for execution processing.
Alternatively, execution processing has been completed.
A debugger for 78K0S microcontrollers has been started and
the CPU is running, or a program is being downloaded.
A debugger for 78K0R microcontrollers has been started and
the CPU is in the break mode.
A debugger for 78K0R microcontrollers has been started and
the CPU is running, or a program is being downloaded.
A command from the QB-Programmer is being executed for
the flash memory.
A command from the QB-Programmer is ended abnormally
(results in error)
Description
Software Operation Status
15