CJ1W-NC414 Omron, CJ1W-NC414 Datasheet - Page 437

• Manufacturer Part Number: CJ1W-NC414
• Description: High Speed Pulse Train 4 Axes
• Manufacturer: Omron

Specifications of CJ1W-NC414

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

9-3 Override
CJ Position Control Units OPERATION MANUAL (CJ1W-NC214/234/414/434)
Outline of Operation
Override is a function that uniformly decreases or increases all operation speeds without
changing the speeds which you specified by command speed.
The PCU multiplies each specified speed by a desired ratio to calculate the operating speed
and changes the current speed to the calculated speed.
Load the set value of [Override] to change the speed while [Override Valid] in the Manual
Operation Command Memory area is ON.
Target speed = Speed command ×
You can set a desired value between 0.00 and 500.00%. If you specify 0.00%, the PCU
functions in the same manner as when you set 0.01%.
Override is enabled during the operations below:
If the target speed exceeds the maximum speed which you set by an axis parameter, the target
speed becomes the maximum speed.
Override is disabled during Origin Search and MPG operation and also when the
synchronization control function is active.
Override valid
Override
Speed
Direct operation
Memory operation
JOG operation/inching operation
Origin Return
override value back to 100%.
Use caution when you turn OFF the override enabled memory area because doing so turns the
Precautions for Correct Use
100.00%
100.00
60.00
Override value can be loaded and speed
can be changed when override is enabled.
20.00
Override
100
160.00
9-3 Override
Time
9-12
9