FX1S-30MR-ES/UL MITSUBISHI, FX1S-30MR-ES/UL Datasheet - Page 314

• Manufacturer Part Number: FX1S-30MR-ES/UL
• Description: PLC, 16 IN, 14 RELAY OUT, 110V/2
• Manufacturer: MITSUBISHI

Specifications of FX1S-30MR-ES/UL

• No. Of Analogue Inputs: 16
• No. Of Analogue Outputs: 14
• Ip/nema Rating: IP10
• Approval Bodies: CE, CUL, UL
• External Depth: 49mm
• External Length / Height: 90mm
• External Width: 60mm
• Mounting Type: Panel

7.6
7.6.1
FX Series Programmable Controllers
8255) and index registers V and Z
Special M and D devices (8000 to
All devices backed by battery
PLC is switched from STOP to RUN
PLC is switched from RUN to STOP
PLC is switched from STOP to RUN
PLC is switched from RUN to STOP
PLC’s power is turned OFF
PLC’s power is turned OFF
This memory area contains, as the title suggests, all of the data values associated with:
data registers (normal and special), Index registers, current timer values, retentive timer
values (if available) and current counter values.
This memory area contains the contact status of all inputs, outputs, auxiliary relays, state coils,
timers and counters.
Summary
Limits Of Instruction Usage
Instructions Which Can Only Be Used Once In The Main Program Area
The following instructions can only be used once in the main program area. For PLC
applicability please check either the detailed explanations of the instructions or the instruction
execution tables list earlier.
PLC’s power is turned ON
PLC’s power is turned ON
All other devices
Memory type
b) Data Memory
- All of the devices which are designated as being latched (including retentive timers) are
- Index registers and special data registers (D8000 to D8255) operate in the specified
- All other devices such as current values of non latched data registers, timers and
c) Bit Memory
- All of the devices which are designated as being latched (including retentive timers) are
- Special auxiliary relays (M8000 to M8255) act in a similar way to the special data
- All other devices are subject to the same changes as the current values of data registers,
Circumstance
Circumstance
backed up in a similar method to the one mentioned under point a).
manner under the following circumstances:
counters behave in the following manner:
backed up in a similar method to the one mentioned under point a).
registers mentioned under point b).
timers and counter (see the last point and table under section b).
Cleared
OFF
Certain devices are reset to their defaults see chapter 6
Certain devices are reset to their defaults see chapter 6
Cleared
Power
Cleared (unless special M coil M8033 is active)
OFF
Default
Not changed
ON
Execution Times And Instructional Hierarchy 7
All data is cleared
All data is cleared
No change
Reaction
Reaction
Not changed when M8033 is set
STOP
Not changed
Not changed
RUN
PLC
RUN
Cleared
STOP
7-14