FX1S-30MR-ES/UL MITSUBISHI, FX1S-30MR-ES/UL Datasheet - Page 167

• Manufacturer Part Number: FX1S-30MR-ES/UL
• Description: PLC, 16 IN, 14 RELAY OUT, 110V/2
• Manufacturer: MITSUBISHI

Specifications of FX1S-30MR-ES/UL

• No. Of Analogue Inputs: 16
• No. Of Analogue Outputs: 14
• Ip/nema Rating: IP10
• Approval Bodies: CE, CUL, UL
• External Depth: 49mm
• External Length / Height: 90mm
• External Width: 60mm
• Mounting Type: Panel

5.5.4
5.5.5
FX Series Programmable Controlers
SUM (FNC 43)
BON (FNC 44)
SUM
FNC 43
(
active bits)
BON
FNC 44
(
specified
bit status)
Sum of
Check
Mnemonic
Mnemonic
The number
(quantity) of
active bits in the
source data is
stored in the
destination device
The status of the
specified bit in the
source device is
indicated at the
destination
Function
Function
K, H,
KnX, KnY, KnM, KnS,
T, C, D, V, Z
K, H,
KnX, KnY,
KnM, KnS,
T, C, D, V,
Z
S
Operation :
The number of active (ON) bits within the source
device (S), i.e. bits which have a value of “1" are
counted. The count is stored in the destination
register (D). If a double word format is used, both the
source and destination devices use 32 bit, double
registers. The destination device will always have its
upper 16 bits set to 0 (zero) as the counted value can
never be more than 32.
If no bits are ON then zero flag, M8020 is set.
Operation :
A single bit position (n) is specified from within a
source device/area (S). n could be regarded as a
specified offset from the source head address (S),
i.e. 0 (zero) being the first device (a 0 offset) where
as an offset of 15 would actually be the 16th device.
If the identified bit becomes active, i.e. ON, the
destination device (D) is activated to “flag” the new
status.
The destination device could be said to act as a
mirror to the status of the selected bit source.
S
Y, M, S
D
Operands
Operands
KnY, KnM, KnS,
T, C, D, V, Z
K,H,
Note:
16 bit operation
32 bit operation
n=0 to 15
n=0 to 31
D
n
Applied Instructions 5
SUM,SUMP:
7 steps
DSUM,
DSUMP:
9 steps
BON, BONP:
7steps
DBONP,
DBON:
13 steps
Program steps
Program steps
5-45