ML610Q428-NNNTBZ03A7 Rohm Semiconductor, ML610Q428-NNNTBZ03A7 Datasheet - Page 58

• Manufacturer Part Number: ML610Q428-NNNTBZ03A7
• Description: MCU 8BIT 48K FLASH 128-TQFP
• Manufacturer: Rohm Semiconductor

Specifications of ML610Q428-NNNTBZ03A7

• Core Processor: nX-U8/100
• Core Size: 8-Bit
• Speed: 4.2MHz
• Connectivity: I²C, SSP, UART/USART
• Peripherals: LCD, Melody Driver, POR, PWM, WDT
• Number Of I /o: 14
• Program Memory Size: 48KB (24K x 16)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.1 V ~ 3.6 V
• Data Converters: A/D 2x12b, 2x24b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 70°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

ML610Q428/ML610Q429 User’s Manual
Chapter 4 MCU Control Function
4.3.4
Block Control Function
This LSI has a block control function, which resets and completely turns operating circuits of unused peripherals off to
make even more reducing current consumption.
When certain bits of block control registers are set to “1”, corresponding peripherals are reset (all registers are reset)
and operating clocks for the peripherals stop. Writing to every SFR (special function register) in the corresponding
peripherals is not valid while the bits of block control registers are set to “1” and returns the initial value for read.
Ensure the bits are reset to “0” before using the peripherals to enable the operation.
BLKCON0 register controls(disables/enables) operation of Timer 0 and Timer 1.
BLKCON1 register controls(disables/enables) operation of 1kHz Timer, PWM0, PWM1 and PWM2.
BLKCON2 register controls(disables/enables) operation of I2C, UART and SSIO.
BLKCON3 register controls(disables/enables) operation of Melody/Buzzer.
BLKCON4 register controls(disables/enables) operation of LCD driver, Battery Level Detector, 32kHz oscillation stop
detector and RC type A/D converter.
Note:
See the each chapter for detail about the opeation of each peripheral and relevant notes.
4 – 15