DLP-USB245M-G DLP Design Inc, DLP-USB245M-G Datasheet - Page 5

MODULE USB-TO-TTL PARL FIFO CONV

DLP-USB245M-G

Manufacturer Part Number
DLP-USB245M-G
Description
MODULE USB-TO-TTL PARL FIFO CONV
Manufacturer
DLP Design Inc
Series
DLP-USB245Mr
Datasheet

Specifications of DLP-USB245M-G

Convert From (adapter End)
USB
Convert To (adapter End)
DB9 Female
Features
Integrated 6MHz-48MHz clock multiplier PLL
Interface Type
USB
Product
Interface Modules
For Use With/related Products
Windows® 98 or higher, Mac OS 8.5 or higher
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
813-1019
5. Run the serializer program and write the VID (0403), PID (6001), a description string of your choosing and
NOTE 1 - The DLP-USB245M comes pre-programmed with a default VID and PID. Step 5 is optional and only
required if different VID/PID codes are required.
NOTE 2 – The “Test” button on the serializer program is intended for use with the DLP-USB232M module (and
At this point the DLP-USB245M is ready for use. Note that the DLP-USB245M will appear non-responsive if data sent
from the host PC is not read from the FT245BM device by an attached microcontroller/microprocessor/DSP/FPGA/
etc…
in step one. Windows will then complete the installation of the device drivers for the DLP-USB245M board. The
next time the DLP-USB245M module is attached, the host PC will immediately load the correct drivers without any
prompting. Reboot the PC if prompted to do so.
manufacturers ID as instructed in the instruction manual that was downloaded with the serializer software.
Terminate the serializer program and disconnect the DLP-USB245M board from the USB cable. Wait 10 seconds
and reconnect the DLP-USB245M board. Reboot the PC if instructed to do so.
FT232BM device) and will fail if used with the DLP-USB245M module. The “Read” function will work and will
present the contents of the EEPROM as well as the serial number and description strings stored in the EEPROM.
Copyright © DLP Design 2002
DLP-USB245M User Manual
Page 5 of 15

Related parts for DLP-USB245M-G