MC68HC908JB8JDW Freescale Semiconductor, MC68HC908JB8JDW Datasheet - Page 57

• Manufacturer Part Number: MC68HC908JB8JDW
• Description: IC MCU 8K FLASH 3MHZ 20-SOIC
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908JB8JDW

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 3MHz
• Connectivity: USB
• Peripherals: LVD, POR, PWM
• Number Of I /o: 13
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 20-SOIC (7.5mm Width)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -

4.6 FLASH Mass Erase Operation
MC68HC908JB8•MC68HC08JB8•MC68HC08JT8 — Rev. 2.3
Freescale Semiconductor
NOTE:
Use the following procedure to erase the entire FLASH memory:
Programming and erasing of FLASH locations cannot be performed by
code being executed from the FLASH memory. While these operations
must be performed in the order as shown, but other unrelated operations
may occur between the steps.
1. Set both the ERASE bit and the MASS bit in the FLASH control
2. Write any data to any FLASH address within the address range
3. Wait for a time, t
4. Set the HVEN bit.
5. Wait for a time t
6. Clear the ERASE bit.
7. Wait for a time, t
8. Clear the HVEN bit.
9. After time, t
register.
$FFE0–$FFFF.
again.
FLASH Memory
rcv
(1 µs), the memory can be accessed in read mode
me
nvs
nvh1
(2 ms).
(5 µs).
(100 µs).
FLASH Mass Erase Operation
FLASH Memory
Technical Data
57