UPD70F3735GK-GAK-AX Renesas Electronics America, UPD70F3735GK-GAK-AX Datasheet - Page 733

• Manufacturer Part Number: UPD70F3735GK-GAK-AX
• Description: MCU 32BIT V850ES/JX3-L 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3735GK-GAK-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 66
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 8x10b, D/A 1x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JF3-L
28.4 Rewriting by Dedicated Flash Programmer
target system (on-board programming). The flash memory can also be rewritten before the device is mounted on the
target system (off-board programming) by using a dedicated program adapter (FA series).
28.4.1 Programming environment
writing, erasing, etc. A dedicated program adapter (FA series) required for off-board writing.
R01UH0017EJ0400 Rev.4.00
Sep 30, 2010
The flash memory can be rewritten by using a dedicated flash programmer after the V850ES/JF3-L is mounted on the
The following shows the environment required for writing programs to the flash memory of the V850ES/JF3-L.
A host machine is required for controlling the dedicated flash programmer.
UARTA0 or CSIB0 is used for the interface between the dedicated flash programmer and the V850ES/JF3-L to perform
• FA-70F3736GC-GAD-RX (GC-GAD type) (already wired)
• FA-70F3736GK-GAK-RX (GK-GAK type) (already wired)
• FA-80GC-GAD-B (GC-GAD type) (not wired: wiring required)
• FA-80GK-GAK-B (GK-GAK type) (not wired: wiring required)
Note Under development
Remark
Note Connect the FLMD1 pin to the flash programmer or connect to GND via a pull-down resistor on the board.
The FA series is a product of Naito Densei Machida Mfg. Co., Ltd.
Host machine
Figure 28-2. Environment Required for Writing Programs to Flash Memory
RS-232C
USB
Dedicated flash
programmer
Note
Note
UARTA0/CSIB0
FLMD1
RESET
FLMD0
V
V
DD
SS
Note
CHAPTER 28 FLASH MEMORY
V850ES/JF3-L
Page 717 of 816