D12350F20IV Renesas Electronics America, D12350F20IV Datasheet - Page 656

• Manufacturer Part Number: D12350F20IV
• Description: IC H8S/2350 MCU 4.5/5.5V 0+K I-T
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12350F20IV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 87
• Program Memory Type: ROMless
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Section 14 Smart Card Interface
14.3
14.3.1
The main functions of the Smart Card interface are as follows.
14.3.2
Figure 14.2 shows a schematic diagram of Smart Card interface related pin connections.
In communication with an IC card, since both transmission and reception are carried out on a
single data transmission line, the TxD pin and RxD pin should be connected with the LSI pin. The
data transmission line should be pulled up to the V
When the clock generated on the Smart Card interface is used by an IC card, the SCK pin output is
input to the CLK pin of the IC card. No connection is needed if the IC card uses an internal clock.
LSI port output is used as the reset signal.
Other pins must normally be connected to the power supply or ground.
Rev. 3.00 Sep 15, 2006 page 620 of 988
REJ09B0330-0300
One frame consists of 8-bit data plus a parity bit.
In transmission, a guard time of at least 2 etu (Elementary Time Unit: the time for transfer of
one bit) is left between the end of the parity bit and the start of the next frame.
If a parity error is detected during reception, a low error signal level is output for one etu
period, 10.5 etu after the start bit.
If the error signal is sampled during transmission, the same data is transmitted automatically
after the elapse of 2 etu or longer.
Only asynchronous communication is supported; there is no clocked synchronous
communication function.
Operation
Overview
Pin Connections
CC
power supply with a resistor.