DF2210CUNP24V Renesas Electronics America, DF2210CUNP24V Datasheet - Page 414

• Manufacturer Part Number: DF2210CUNP24V
• Description: MCU 16BIT FLASH 3V 32K 64-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of DF2210CUNP24V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: SCI, SmartCard, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 37
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

11.4
11.4.1
The RTC registers that store second, minute, hour, day-of week, operating mode, and A.M./P.M.
data are not reset by an STBY input. Therefore, all registers must be set to their initial values after
power-on and STBY input. Figure 11.3 shows the initial setting and resetting procedures of the
RTC. Once the register setting are made, the RTC provides an accurate time as long as power is
supplied regardless of a RES input.
Rev.7.00 Dec. 24, 2008 Page 358 of 698
REJ09B0074-0700
Operation
Initial Settings of Registers after Power-On and Resetting Procedure
Set RSECDR, RMINDR,
RHRDR, RWKDR,
12/24 in RTCCR1, and PM
RUN in RTCCR1=1
RST in RTCCR1=1
RST in RTCCR1=0
Figure 11.3 Initial Setting Procedure
Clock count controller is reset.
Second, minute, hour, day-of-week,
operating mode, and a.m/p.m are set.
RTC operation is started.