HD64F3672FPIV Renesas Electronics America, HD64F3672FPIV Datasheet - Page 209

• Manufacturer Part Number: HD64F3672FPIV
• Description: MCU 3/5V 16K I-TEMP PB-FREE 64-L
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3672FPIV

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SCI
• Peripherals: PWM, WDT
• Number Of I /o: 26
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• For Use With: R0K436079S000BE - KIT DEV FOR H8/36079 W/COMPILER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

(A)
Yes
No
Figure 13.8 Sample Serial Data Reception Flowchart (Asynchronous mode) (1)
Read receive data in RDR
Clear RE bit in SCR3 to 0
Read RDRF flag in SSR
Read OER, PER, and
OER+PER+FER = 1
All data received?
FER flags in SSR
Start reception
RDRF = 1
<End>
Yes
No
No
(Continued on next page)
Error processing
[1]
Yes
[2]
[3]
[4]
Section 13 Serial Communication Interface 3 (SCI3)
[1] Read the OER, PER, and FER flags in
[2] Read SSR and check that RDRF = 1,
[3] To continue serial reception, before the
[4] If a receive error occurs, read the OER,
The RDRF flag is cleared automatically.
SSR to identify the error. If a receive
error occurs, performs the appropriate
error processing.
then read the receive data in RDR.
The RDRF flag is cleared automatically.
stop bit for the current frame is
received, read the RDRF flag and read
RDR.
PER, and FER flags in SSR to identify
the error. After performing the
appropriate error processing, ensure
that the OER, PER, and FER flags are
all cleared to 0. Reception cannot be
resumed if any of these flags are set to
1. In the case of a framing error, a
break can be detected by reading the
value of the input port corresponding to
the RxD pin.
Rev.4.00 Nov. 02, 2005 Page 183 of 304
REJ09B0143-0400