P89LPC9408FBD,557 NXP Semiconductors, P89LPC9408FBD,557 Datasheet - Page 32

• Manufacturer Part Number: P89LPC9408FBD,557
• Description: IC 80C51 MCU FLASH 8K 64-LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC900r

Specifications of P89LPC9408FBD,557

• Program Memory Type: FLASH
• Program Memory Size: 8KB (8K x 8)
• Package / Case: 64-LQFP
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 18MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, LED, POR, PWM, WDT
• Number Of I /o: 23
• Eeprom Size: 512 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: P89LPC9x
• Core: 80C51
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 18 MHz
• Number Of Programmable I/os: 23
• Number Of Timers: 2
• Operating Supply Voltage: 2.4 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: OM10097 - KIT FOR LCD DEMO LPC9408EPM900K - EMULATOR/PROGRAMMER NXP P89LPC9568-4000 - DEMO BOARD SPI/I2C TO DUAL UART568-3510 - DEMO BOARD SPI/I2C TO UART568-1759 - EMULATOR DEBUGGER/PROGRMMR LPC9X
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-3228; 935280583557; P89LPC9408FBD

Philips Semiconductors
P89LPC9408_1
Product data sheet
7.19.7 Alternating output mode
7.19.8 PLL operation
In asymmetrical mode, the user can set up PWM channels A/B and C/D as alternating
pairs for bridge drive control. In this mode the output of these PWM channels are
alternately gated on every counter cycle.
The PWM module features a Phase Locked Loop that can be used to generate a
CCUCLK frequency between 16 MHz and 32 MHz. At this frequency the PWM module
provides ultrasonic PWM frequency with 10-bit resolution provided that the crystal
frequency is 1 MHz or higher. The PLL is fed an input signal of 0.5 MHz to 1 MHz and
generates an output signal of 32 times the input frequency. This signal is used to clock the
timer. The user will have to set a divider that scales PCLK by a factor of 1 to 16. This
divider is found in the SFR register TCR21. The PLL frequency can be expressed as
shown in
Where: N is the value of PLLDV3:0.
Since N ranges in 0 to 15, the CCLK frequency can be in the range of PCLK to
PLL frequency
Fig 10. Alternate output mode
Equation
8-bit two-clock 80C51 core with 32 segment
=
----------------- -
PLCK
N
1.
+
Rev. 01 — 16 December 2005
1
002aaa895
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
TOR2
COMPARE VALUE A (or C)
COMPARE VALUE B (or D)
0
PWM OUTPUT (OCA or OCC)
PWM OUTPUT (OCB or OCD)
TIMER VALUE
P89LPC9408
4 LCD driver, 10-bit ADC
PCLK
32 of 69
16
.
(1)