AT32UC3B0512-Z2UR Atmel, AT32UC3B0512-Z2UR Datasheet - Page 377

• Manufacturer Part Number: AT32UC3B0512-Z2UR
• Description: IC MCU AVR32 512K FLASH 64QFN
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3B0512-Z2UR

• Package / Case: 64-QFN
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 60MHz
• Number Of I /o: 44
• Core Processor: AVR
• Program Memory Type: FLASH
• Ram Size: 96K x 8
• Program Memory Size: 512KB (512K x 8)
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Connectivity: I²C, IrDA, SPI, SSC, UART/USART, USB
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

32059J–12/2010
U(P/E)RST.(E)PENn = 1
U(P/E)CFGn.ALLOC = 1
Pipes/Endpoints 0..5
Free Memory
Activated
configuration (the Pipe Banks (PBK) field, the Pipe Size (PSIZE) field, the Pipe Token (PTO-
KEN) field, the Pipe Type (PTYPE) field, the Pipe Endpoint Number (PEPNUM) field, and the
Pipe Interrupt Request Frequency (INTFRQ) field in the Pipe n Configuration (UPCFGn) regis-
ter/the Endpoint Banks (EPBK) field, the Endpoint Size (EPSIZE) field, the Endpoint Direction
(EPDIR) field, and the Endpoint Type (EPTYPE) field in UECFGn).
To free its memory, the user shall write a zero to the UECFGn.ALLOC bit. The n+1 pipe/end-
point memory window then slides down and its data is lost. Note that the following pipe/endpoint
memory windows (from n+2) does not slide.
Figure 22-8 on page 377
example.
Figure 22-8. Allocation and Reorganization of the DPRAM
1. The pipes/endpoints 0 to 5 are enabled, configured and allocated in ascending order.
2. The pipe/endpoint 3 is disabled, but its memory is kept allocated by the controller.
3. In order to free its memory, its ALLOC bit is written to zero. The pipe/endpoint 4 memory
4. If the user chooses to reconfigure the pipe/endpoint 3 with a larger size, the controller
Note that:
• There is no way the data of the pipe/endpoint 0 can be lost (except if it is de-allocated) as
• Deactivating then reactivating a same pipe/endpoint with the same configuration only modifies
PEP5
PEP4
PEP3
PEP2
PEP1
PEP0
memory allocation and de-allocation may affect only higher pipes/endpoints.
temporarily the controller DPRAM pointer and size for this pipe/endpoint, but nothing changes
in the DPRAM, so higher endpoints seem to not have been moved and their data is preserved
Each pipe/endpoint then owns a memory area in the DPRAM.
window slides down, but the pipe/endpoint 5 does not move.
allocates a memory area after the pipe/endpoint 2 memory area and automatically slides
up the pipe/endpoint 4 memory window. The pipe/endpoint 5 does not move and a mem-
ory conflict appears as the memory windows of the pipes/endpoints 4 and 5 overlap. The
data of these pipes/endpoints is potentially lost.
U(P/E)RST.(E)PEN3 = 0
Pipe/Endpoint 3
(ALLOC stays at 1)
Free Memory
Disabled
PEP5
PEP4
PEP3
PEP2
PEP1
PEP0
illustrates the allocation and reorganization of the DPRAM in a typical
U(P/E)CFG3.ALLOC = 0
Pipe/Endpoint 3
PEP4 Lost Memory
Memory Freed
Free Memory
PEP5
PEP4
PEP2
PEP1
PEP0
U(P/E)RST.(E)PEN3 = 1
U(P/E)CFG3.ALLOC = 1
Pipe/Endpoint 3
PEP3 (larger size)
Free Memory
Activated
PEP4
PEP2
PEP1
PEP0
PEP5
AT32UC3B
Conflict
377