EP9315-CBZ Cirrus Logic Inc, EP9315-CBZ Datasheet - Page 520

• Manufacturer Part Number: EP9315-CBZ
• Description: IC ARM9 SOC ENH UNIV 352PBGA
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9315-CBZ

• Core Size: 16/32-Bit
• Core Processor: ARM9
• Speed: 200MHz
• Connectivity: EBI/EMI, EIDE, Ethernet, I²C, IrDA, Keypad/Touchscreen, PCMCIA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LCD, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 352-BGA
• Controller Family/series: (ARM9)
• No. Of I/o's: 16
• Cpu Speed: 200MHz
• No. Of Timers: 5
• Digital Ic Case Style: BGA
• Supply Voltage Range: 1.65V To 1.94V, 3V To 3.6V
• Embedded Interface Type: SPI
• Rohs Compliant: Yes
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9315A-Z
• Case: BGA
• Dc: 06+
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1144 - KIT DEVELOPMENT EP9315 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 598-1139

13
13-24
SDRAM, SyncROM, and SyncFLASH Controller
EP93xx User’s Guide
SFConfigAddr:
2KPAGE:
CasLat:
Copyright 2007 Cirrus Logic
When writing to a SyncFLASH device, only single writes
(burst-of-one) are allowed. The value that is written to this
bit specifies that a burst length of either one or four will be
used for Write accesses:
0 - Burst-of-four accesses for both Reads and Writes
1 - Burst-of-one accesses for Writes (SyncFLASH support)
and burst-of-four accesses for Reads
When WBM = ‘1’, the Synchronous Memory controller will
not issue refresh cycles to this domain.
A single word write occurs when the ARM assembly
instruction, ‘str’, is executed. Writing WBM = ‘1’ will not
prevent burst-of-four writes from occurring when the ARM
assembly instruction, ‘stm’, is executed. So, only use
ARM assembly “str” instructions for Write accesses
to SyncFLASH devices.
Synchronous memory CAS Latency - Read/Write
The value written to this field specifies the CAS latency
that the Synchronous Memory controller uses for Read or
Write accesses to SDRAM or SyncROM devices:
000 - Reserved
001 - CAS Latency = 2
010 - CAS Latency = 3 (also normal default)
011 - CAS Latency =4
100 - CAS Latency =5 (also default when booting from a
SyncROM device)
101 - CAS Latency =6
110 - CAS Latency = 7
111 - CAS Latency =8
SyncFLASH Configuration register read - Read/Write
The value written to this bit specifies either normal
operation or that the Synchronous Memory controller is
caused to perform a Read access to the Configuration
register that is inside a SyncFLASH device:
0 - Normal operation
1 - Read SyncFLASH Configuration register
The AutoPrecharge bit must be ‘0’ before the
SFConfigAddr bit is written to ‘1’.
Synchronous memory 2K byte Page - Read/Write
DS785UM1