C8051F988-GM Silicon Laboratories Inc, C8051F988-GM Datasheet - Page 210

• Manufacturer Part Number: C8051F988-GM
• Description: IC MCU 8BIT 4KB FLASH 24QFN
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F9xxr

Specifications of C8051F988-GM

• Program Memory Type: FLASH
• Program Memory Size: 4KB (4K x 8)
• Package / Case: 24-UQFN Exposed Pad, 24-HUQFN
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 17
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F9x
• Core: 8051
• Data Ram Size: 512 B
• Interface Type: I2C, SMBus, Enhanced UART, Enhanced SPI
• Maximum Clock Frequency: 7 KHz
• Number Of Programmable I/os: 17
• Number Of Timers: 4
• Operating Supply Voltage: 2.4 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F996DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel
• On-chip Dac: 10 bit, 4 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1959-5

C8051F99x-C8051F98x
Internal Register Definition 20.5. RTC0XCN: SmaRTClock Oscillator Control
SmaRTClock Address = 0x05
210
Name
Reset
Type
Bit
2:0
7
6
5
4
3
Bit
CLKVLD
XMODE
AGCEN
BIASX2
Unused
LFOEN
Name
AGCEN
R/W
7
0
SmaRTClock Oscillator Automatic Gain Control (AGC) Enable.
0: AGC disabled.
1: AGC enabled.
SmaRTClock Oscillator Mode.
Selects Crystal or Self Oscillate Mode.
0: Self-Oscillate Mode selected.
1: Crystal Mode selected.
SmaRTClock Oscillator Bias Double Enable.
Enables/disables the Bias Double feature.
0: Bias Double disabled.
1: Bias Double enabled.
SmaRTClock Oscillator Crystal Valid Indicator.
Indicates if oscillation amplitude is sufficient for maintaining oscillation.
0: Oscillation has not started or oscillation amplitude is too low to maintain oscillation.
1: Sufficient oscillation amplitude detected.
Low Frequency Oscillator Enable and Select.
Overrides XMODE and selects the internal low frequency oscillator (LFO) as the
SmaRTClock oscillator source.
0: XMODE determines SmaRTClock oscillator source.
1: LFO enabled and selected as SmaRTClock oscillator source.
Read = 000b; Write = Don’t Care.
XMODE
R/W
6
0
BIASX2
R/W
5
0
CLKVLD
Rev. 1.0
R
4
0
Function
LFOEN
R
3
0
R
2
0
R
1
0
R
0
0