LPC2470FET208,551 NXP Semiconductors, LPC2470FET208,551 Datasheet - Page 296

• Manufacturer Part Number: LPC2470FET208,551
• Description: IC ARM7 MCU LCD 208-TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2470FET208,551

• Package / Case: 208-TFBGA
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Type: ROMless
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN/I2C/I2S/SPI/SSP/UART/USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, MCB2470U
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 1-ch x 10-bit
• Package: 208TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• Operating Supply Voltage: 3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4362; 935284071551; LPC2470FET208-S

NXP Semiconductors
UM10237_4
User manual
6.5.5 Cursor clipping
With FrameSync inactive, the cursor responds immediately to any change in the
programmed CRSR_XY value. Some transient smearing effects may be visible if the
cursor is moved across the LCD scan line.
With FrameSync active, the cursor only updates its position after a vertical
synchronization has occurred. This provides clean cursor movement, but the cursor
position only updates once a frame.
The CRSR_XY register (see Cursor XY Position register) is programmed with positive
binary values that enable the cursor image to be located anywhere on the visible screen
image. The cursor image is clipped automatically at the screen limits when it extends
beyond the screen image to the right or bottom (see X1,Y1 in
pattern shows the visible portion of the cursor.
Because the CRSR_XY register values are positive integers, to emulate cursor clipping
on the left and top of screen, a Clip Position register, CRSR_CLIP, is provided. This
controls which point of the cursor image is positioned at the CRSR_CLIP coordinate. For
clipping functions on the Y axis, CRSR_XY(X) is zero, and Clip(X) is programmed to
provide the offset into the cursor image (X2 and X3). The equivalent function is provided
to clip on the X axis at the top of the display (Y2).
For cursors that are not clipped at the X=0 or Y=0 lines, program the Clip Position register
X and Y fields with zero to display the cursor correctly. See Clip(X4,Y4) for the effect of
incorrect programming.
Fig 38. Cursor clipping
Clip(X3)
Rev. 04 — 26 August 2009
Clip(X2)
Cursor(X5)
Clip(X4)
Cursor(X1)
Chapter 12: LPC24XX LCD controller
Figure
12–38). The checked
UM10237
© NXP B.V. 2009. All rights reserved.
296 of 792