PSB 21150 F V1.4 Infineon Technologies, PSB 21150 F V1.4 Datasheet - Page 73

• Manufacturer Part Number: PSB 21150 F V1.4
• Description: IC MODULAR ISDN NT INTELL TQFP64
• Manufacturer: Infineon Technologies

Specifications of PSB 21150 F V1.4

• Function: PC Adapter Circuit
• Interface: HDLC, ISDN, SCI
• Number Of Circuits: 1
• Voltage - Supply: 3.3V
• Current - Supply: 30mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 64-LFQFP
• Includes: Activation and Deactivation, D-Channel Access Control, Monitor Channel Handler
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Other names: PSB21150FV1.4XT; PSB21150FV14NP; PSB21150FV14XP; SP000007575; SP000007577

IPAC-X
PSB/PSF 21150
Description of Functional Blocks
3.5
Control of Layer-1
The layer-1 activation/ deactivation can be controlled by an internal state machine via
the IOM-2 C/I0 channel or by software via the microcontroller interface directly. In the
default state the internal layer-1 state machine of the IPAC-X is used. By setting the
L1SW bit in the TR_CONF0 register the internal state machine can be disabled and the
layer-1 commands, which are normally generated by the internal state machine are
written directly in the TR_CMD register or indications read from the TR_STA register
respectively. The IPAC-X layer-1 control flow is shown in
Figure
40.
Figure 40
Layer-1 Control
In the following sections the layer-1 control by the IPAC-X state machine will be
described. For the description of the IOM-2 C/I0 channel see also
Chapter
3.7.4.
The layer-1 functions are controlled by commands issued via the CIX0 register. These
commands, sent over the IOM-2 C/I channel 0 to layer 1, trigger certain procedures,
such as activation/deactivation, switching of test loops and transmission of special pulse
patterns. These procedures are governed by layer-1 state diagrams. Responses from
layer 1 are obtained by reading the CIR0 register after a CIC interrupt (ISTA).
The state diagrams of the IPAC-X are shown in
Figure 42
and
Figure
43. The activation/
deactivation implemented by the IPAC-X agrees with the requirements set forth in ITU
recommendations. State identifiers F1-F8 are in accordance with ITU I.430.
Data Sheet
73
2003-01-30