PSB 21150 F V1.4 Infineon Technologies, PSB 21150 F V1.4 Datasheet - Page 53

• Manufacturer Part Number: PSB 21150 F V1.4
• Description: IC MODULAR ISDN NT INTELL TQFP64
• Manufacturer: Infineon Technologies

Specifications of PSB 21150 F V1.4

• Function: PC Adapter Circuit
• Interface: HDLC, ISDN, SCI
• Number Of Circuits: 1
• Voltage - Supply: 3.3V
• Current - Supply: 30mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 64-LFQFP
• Includes: Activation and Deactivation, D-Channel Access Control, Monitor Channel Handler
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Other names: PSB21150FV1.4XT; PSB21150FV14NP; PSB21150FV14XP; SP000007575; SP000007577

IPAC-X
PSB/PSF 21150
Description of Functional Blocks
TE Mode
After multi-frame synchronization has been established, the Q data will be inserted at the
upstream (TE ® NT) F
bit position in each 5th S/T frame (see
Table
8).
A
When synchronization is not achieved or lost, each received F
bit is mirrored to the next
A
transmitted F
bit.
A
Multi-frame synchronization is achieved after two complete multi-frames have been
detected with reference to F
/N bit and M bit positions. Multi-frame synchronization is lost
A
if bit errors in F
/N bit or M bit positions have been detected in two consecutive multi-
A
frames. The synchronization state is indicated by the MSYN bit in the S/Q-channel
receive register (SQRR1).
The multi-frame synchronization can be enabled or disabled by programming the MFEN
bit in the S/Q-channel transmit register (SQXR1).
NT Mode
The transceiver in NT mode starts multiframing if SQXR1.MFEN is set.
After multi-frame synchronization has been established in the TE, the Q data will be
inserted at the upstream (TE ® NT) F
bit position by the TE in each 5th S/T frame, the
A
S data will be inserted at the downstream (NT ® TE) S bit position in each S/T frame
(see
Table
8).
Interrupt Handling for Multi-Framing
To trigger the microcontroller for a multi-frame access an interrupt can be generated
once per multi-frame (SQW) or if the received S-channels (TE) or Q-channel (NT) have
changed (SQC).
In both cases the microcontroller has access to the multiframe within the duration of one
multiframe (5 ms).
Data Sheet
53
2003-01-30