PSB 21150 F V1.4 Infineon Technologies, PSB 21150 F V1.4 Datasheet - Page 42

• Manufacturer Part Number: PSB 21150 F V1.4
• Description: IC MODULAR ISDN NT INTELL TQFP64
• Manufacturer: Infineon Technologies

Specifications of PSB 21150 F V1.4

• Function: PC Adapter Circuit
• Interface: HDLC, ISDN, SCI
• Number Of Circuits: 1
• Voltage - Supply: 3.3V
• Current - Supply: 30mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 64-LFQFP
• Includes: Activation and Deactivation, D-Channel Access Control, Monitor Channel Handler
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Other names: PSB21150FV1.4XT; PSB21150FV14NP; PSB21150FV14XP; SP000007575; SP000007577

IPAC-X
PSB/PSF 21150
Description of Functional Blocks
All eight interrupt bits in the ISTA register point at interrupt sources in the D-channel
HDLC Controller (ICD), B-channel HDLC controllers (ICA, ICB), Monitor- (MOS) and C/
I- (CIC) handler, the transceiver (TRAN), the synchronous transfer (ST) and the auxiliary
interrupts (AUXI).
All these interrupt sources are described in the corresponding chapters. After the device
has requested an interrupt activating the interrupt pin (INT), the host must read first the
device interrupt status register (ISTA) in the associated interrupt service routine. The
interrupt pin of the device remains active until all interrupt sources are cleared by reading
the corresponding interrupt register. Therefore it is possible that the interrupt pin is still
active when the interrupt service routine is finished.
Each interrupt indication of the interrupt status registers can selectively be masked by
setting the respective bit in the MASK register.
For some interrupt controllers or hosts it might be necessary to generate a new edge on
the interrupt line to recognize pending interrupts. This can be done by masking all
interrupts at the end of the interrupt service routine (writing FF
into the MASK register)
H
and write back the old mask to the MASK register.
Data Sheet
42
2003-01-30