PIC18F65K90T-I/PT Microchip Technology, PIC18F65K90T-I/PT Datasheet - Page 9

• Manufacturer Part Number: PIC18F65K90T-I/PT
• Description: 32kB Flash, 2kB RAM, 1kB EE, NanoWatt XLP, LCD 64 TQFP 10x10x1mm T/R
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F65K90T-I/PT

• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 32 KB
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI
• Maximum Clock Frequency: 64 MHz
• Number Of Timers: 8
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 16 Channel
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 53
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TQFP
• Lead Free Status / Rohs Status: Details

1.0
This document contains device-specific information for
the following devices:
This family combines the traditional advantages of all
PIC18 microcontrollers – namely, high computational
performance and a rich feature set – with a versatile
on-chip LCD driver, while maintaining an extremely
competitive price point. These features make the
PIC18F87K90 family a logical choice for many
high-performance applications where price is a primary
consideration.
1.1
1.1.1
All of the devices in the PIC18F87K90 family incorpo-
rate a range of features that can significantly reduce
power consumption during operation. Key items include:
• Alternate Run Modes: By clocking the controller
• Multiple Idle Modes: The controller can also run
• On-the-Fly Mode Switching: The power-managed
• nanoWatt XLP: An extra low-power BOR, RTCC
1.1.2
All of the devices in the PIC18F87K90 family offer
different oscillator options, allowing users a range of
choices in developing application hardware. These
include:
• External Resistor/Capacitor (RC); RA6 available
• External Resistor/Capacitor with Clock Out (RCIO)
• Three External Clock modes:
• A Phase Lock Loop (PLL) frequency multiplier,
 2009-2011 Microchip Technology Inc.
• PIC18F65K90
• PIC18F66K90
• PIC18F67K90
from the Timer1 source or the internal RC
oscillator, power consumption during code
execution can be reduced.
with its CPU core disabled but the peripherals still
active. In these states, power consumption can be
reduced even further.
modes are invoked by user code during operation,
allowing the user to incorporate power-saving ideas
into their application’s software design.
and low-power Watchdog Timer. Also, an ultra
low-power regulator for Sleep mode is provided in
regulator-enabled modes.
- External Clock (EC); RA6 available
- External Clock with Clock Out (ECIO)
- External Crystal (XT, HS, LP)
available to the External Oscillator modes which
allows clock speeds of up to 64 MHz. PLL can
also be used with the internal oscillator.
DEVICE OVERVIEW
Core Features
nanoWatt TECHNOLOGY
OSCILLATOR OPTIONS AND
FEATURES
• PIC18F85K90
• PIC18F86K90
• PIC18F87K90
PIC18F87K90 FAMILY
• An internal oscillator block that provides a 16 MHz
The internal oscillator block provides a stable reference
source that gives the family additional features for
robust operation:
• Fail-Safe Clock Monitor: This option constantly
• Two-Speed Start-up: This option allows the
1.1.3
The PIC18F87K90 family provides ample room for
application code, from 32 Kbytes to 128 Kbytes of code
space. The Flash cells for program memory are rated
to last up to 10,000 erase/write cycles. Data retention
without refresh is conservatively estimated to be
greater than 40 years.
The Flash program memory is readable and writable.
During normal operation, the PIC18F87K90 family also
provides plenty of room for dynamic application data
with up to 3,828 bytes of data RAM.
1.1.4
The PIC18F87K90 family implements the optional
extension to the PIC18 instruction set, adding 8 new
instructions and an Indexed Addressing mode.
Enabled as a device configuration option, the extension
has been specifically designed to optimize re-entrant
application code originally developed in high-level
languages, such as ‘C’.
1.1.5
Regardless of the memory size, all devices share the
same rich set of peripherals (except the 32-Kbyte parts,
which have two less CCPs and three less Timers),
allowing for a smooth migration path as applications
grow and evolve.
The consistent pinout scheme, used throughout the
entire family, also aids in migrating to the next larger
device. This is true when moving between the 64-pin
members, between the 80-pin members, or even
jumping from 64-pin to 80-pin devices.
clock (±2% accuracy) and an INTRC source
(approximately 31 kHz, stable over temperature
and V
- Operates as HF-INTOSC or MF-INTOSC
- Frees the two oscillator pins for use as
monitors the main clock source against a reference
signal provided by the internal oscillator. If a clock
failure occurs, the controller is switched to the inter-
nal oscillator, allowing for continued low-speed
operation or a safe application shutdown.
internal oscillator to serve as the clock source
from Power-on Reset, or wake-up from Sleep
mode, until the primary clock source is available.
when block selected for 16 MHz or 500 kHz
additional general purpose I/O
DD
)
MEMORY OPTIONS
EXTENDED INSTRUCTION SET
EASY MIGRATION
DS39957D-page 9