866 B&K Precision, 866 Datasheet - Page 70

• Manufacturer Part Number: 866
• Description: PROGRAMMER UNIV W/ USB INTERFACE
• Manufacturer: B&K Precision
• Type: Universalr

Specifications of 866

• Contents: Programmer, Adapter, Cable, Manual and Software
• For Use With/related Products: EPROM, EEPROM-Flash, Serial EPROM, Microcontroller & PLD
• Other names: 866BK; Q2005647

Technical specification
HARDWARE
Programmer
ZIF socket, pindriver
ISP connector
• two D/A converters for VCCP and VPP, controllable rise and
• VCCP range 0..7V/350mA
• VPP range 0..25V/200mA
• FPGA based IEEE 1284 slave printer port, up to 1MB/s
• autocalibration
• self test capability
• 40-pin DIL ZIF (Zero Insertion Force) socket accepts both
• pindriver: 40 TTL pindrivers, universal GND/VCC/VPP
• FPGA based TTL driver provides H, L, CLK, pull-up, pull-
• in-circuit serial programming (ISP) capability included
• continuity test: each pin is tested before every programming
• 10-pin male type with missinsertion lock
• 6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level
• 1x VCCP voltage (range 2V..7V/100mA) and 1x VPP voltage
• programmed chip voltage (VCCP) with both source/sink
fall time
transfer rate
300/600 mil devices up to 40-pins
pindriver
down on all pindriver pins, level H selectable from 1.8 V up to
5V
operation
H selectable from 1.8V up to 5V to handle all (low-voltage
including) devices.
(range 2V..25V/50mA)
capability and voltage sense
70