866 B&K Precision, 866 Datasheet - Page 146

• Manufacturer Part Number: 866
• Description: PROGRAMMER UNIV W/ USB INTERFACE
• Manufacturer: B&K Precision
• Type: Universalr

Specifications of 866

• Contents: Programmer, Adapter, Cable, Manual and Software
• For Use With/related Products: EPROM, EEPROM-Flash, Serial EPROM, Microcontroller & PLD
• Other names: 866BK; Q2005647

Help
Options / Save options
Pressing the <F1> key accesses the Help. When you selecting
menu item and press <F1>, you access context-sensitive help.
If PG4UW is executing an operation with the programmer <F1>
generates no response.
The following Help items are highlighted:
• words describing the keys referred to by the current Help
• all other significant words
• current cross-references; click on this cross-reference to
Detailed information on individual menu commands can be
found in the integrated on-line Help.
Note: Information provided in this manual is intended to be
accurate at the moment of release, but we continuously
To switch program from Protected mode to normal mode use
the menu command Options / Normal mode. The ”Password
required" dialog appears. User has to enter the same
password as the password entered during switch to Protected
mode.
Other way to cancel Protected mode of program is closing of
program, because program Protected mode is active until
program is closed. The next program start will be to Normal
(standard) mode (the only exception is case of project loaded
by command line parameter name of project and the project
was saved in Protected mode).
This command saves all settings that are currently supported
for saving, even if auto-save is turned off. Following options
are saved: options under the Options menu, ten last selected
devices, file history, main program window position and size.
2. by reading project, which was previously saved in
obtain further information.
Since the Help system is continuously updated together
with the control program, it may contain information not
included in this manual.
After
Protected mode. The entered password is then used to
switch off Protected mode.
Protected mode. For details see File / Save project.
password
confirmation
146
program
switches
to