HS7046EPH60H Renesas Electronics America, HS7046EPH60H Datasheet - Page 50

• Manufacturer Part Number: HS7046EPH60H
• Description: DEV EMULATOR BASE SH7046
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: Microcontrollerr

Specifications of HS7046EPH60H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: SH7046
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Installing IC Socket
1. Installing IC Socket
2. Soldering IC Socket
Connection Using the HS7046ECH61H
Notes: 1. For more details on the HS7046ECH61H, refer to the user’s manual supplied with the emulator.
Install the FP-80Q IC socket (IC149-080-017-B5 manufactured by YAMAICHI ELECTRONICS Co., LTD.) on
the user system to connect the emulator. Since the pin arrangement is the same as that of the actual MCU, refer
to the hardware manual.
Figure 3.9 shows the connection of the HS7046ECH61H, figure 3.10 shows the size restrictions for the installed
components of the HS7046ECH61H, and figure 3.11 shows the recommended mount pad dimensions of the user
system IC socket.
28
Install the IC socket for each package to the user system. After checking the location of pin 1 on the IC
socket, apply epoxy resin adhesive to the bottom of the IC, and fasten it to the user system before soldering.
After fastening, solder the IC socket to the user system. Be sure to completely solder the leads so that the
solder slops gently over the leads and forms solder fillets. (Use slightly more solder than the MCU.)
connecting or disconnecting any CABLES.
Failure to do so will result in a FIRE HAZARD, and will damage
the user system or emulator or result in PERSONAL INJURY.
Also, the USER PROGRAM will be LOST.
2. This user system interface board can only be used in combination with the specified QFP socket
Always switch OFF the emulator and user system before
(IC149-080-017-B5).
WARNING