HS7046EPH60H Renesas Electronics America, HS7046EPH60H Datasheet - Page 32

• Manufacturer Part Number: HS7046EPH60H
• Description: DEV EMULATOR BASE SH7046
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: Microcontrollerr

Specifications of HS7046EPH60H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: SH7046
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2
2.2.1
1. Check that the emulator power switch is turned off. Ensure that the power lamp on the right side of the
2. Remove the AC power cable of the E6000H station from the outlet (if the cable is connected to the outlet).
3. Connect pin 1 on the user system connector to the connector installed at the bottom of the E6000H user
10
E6000H station's front panel is not lit.
system interface board. When connecting the connector, prevent the upper or lower side of the board from
lifting off the connector. Alternately tighten the screws on both sides of the board.
connecting or disconnecting any CABLES. Failure to do so will result
in a FIRE HAZARD and will damage the user system and the emulator
or will result in PERSONAL INJURY. The USER PROGRAM will be
LOST.
Connecting the User System
Emulator Connection
Always switch OFF the emulator and user system before
WARNING