HS7046EPH60H Renesas Electronics America, HS7046EPH60H Datasheet - Page 159

• Manufacturer Part Number: HS7046EPH60H
• Description: DEV EMULATOR BASE SH7046
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: Microcontrollerr

Specifications of HS7046EPH60H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: SH7046
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

(2) Start Point To End Point Measurement
[Range Name]:
[Point]:
[Time Out Action]:
[Time Out]:
[Start Address]:
[End Address]:
Figure 3.39 Start Point To End Point Measurement Settings
The name of the range to be measured
The range for the Start Point To End Point Measurement
The action to take when a timeout or count-out occurs.
Disable: Disables setting of a timeout or count-out value.
Enable: Stops the user program execution when a timeout or count-out occurs.
Trace Stop: Stops trace acquisition when a timeout or count-out occurs.
This is only available for channel 1.
The timeout value to finish measurement. When the minimum time for measurement
is 160 ns, 40 ns, or 20 ns, enter the value as follows.
Example: 1h 2min 3s 123ms 456us 789ns
If the CPU operating mode is target, enter a hexadecimal number in 10 digits.
Example: 123456789A
A break occurs every time a value measured in the specified range exceeds the
timeout value (not the total time). This is only available for channel 1.
Address to start measurement
Address to end measurement
71