SOUNDBITE Freescale Semiconductor, SOUNDBITE Datasheet - Page 19

• Manufacturer Part Number: SOUNDBITE
• Description: BOARD DEMO AUDIO DEVELOPMENT
• Manufacturer: Freescale Semiconductor
• Series: Symphony™ soundBiter

Specifications of SOUNDBITE

• Main Purpose: Audio, Audio Processing
• Utilized Ic / Part: DSPB56371
• Primary Attributes: Up to 8 channels of digital audio
• Secondary Attributes: USB, I2C, SPI Interface
• Processor To Be Evaluated: DSP56371
• Data Bus Width: 24 bit
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Embedded: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3.8
Freescale Semiconductor
Signal
HCKR
Name
HCKT
PC2
PC5
Enhanced Serial Audio Interface
Input, output, or
Input, output, or
Input or output
Input or output
disconnected
disconnected
Signal Type
Table 8. Enhanced Serial Audio Interface Signals
State during
disconnected
disconnected
Reset
GPIO
GPIO
DSP56371 Data Sheet, Rev. 4.1
High Frequency Clock for Receiver—When programmed as an
input, this signal provides a high frequency clock source for the
ESAI receiver as an alternate to the DSP core clock. When
programmed as an output, this signal can serve as a
high-frequency sample clock (for example, for external digital to
analog converters [DACs]) or as an additional system clock.
Port C2—When the ESAI is configured as GPIO, this signal is
individually programmable as input, output, or internally
disconnected.
The default state after reset is GPIO disconnected.
Internal Pull down resistor.
This input is 5 V tolerant.
High Frequency Clock for Transmitter—When programmed as
an input, this signal provides a high frequency clock source for the
ESAI transmitter as an alternate to the DSP core clock. When
programmed as an output, this signal can serve as a high
frequency sample clock (for example, for external DACs) or as an
additional system clock.
Port C5—When the ESAI is configured as GPIO, this signal is
individually programmable as input, output, or internally
disconnected.
The default state after reset is GPIO disconnected.
Internal Pull down resistor.
This input is 5 V tolerant.
Signal Description
Signal/Connection Descriptions
19