zl50407 Zarlink Semiconductor, zl50407 Datasheet - Page 65

• Manufacturer Part Number: zl50407
• Description: Lightly Managed/unmanaged 8-port 10/100m + 1-port 10/100/1000m Ethernet Switch
• Manufacturer: Zarlink Semiconductor

Port 8: (CPU Port)
Bit [5]:
Bit [6]:
Bit [7]:
Bit [1:0]:
Bit [2]:
Bit[4:3]:
Bit [5]:
Bit [6]:
Bit [7]:
Frame loopback.
0: Disable frame from sending back to its source port. (Default)
1: Allow frame to send back to its source port
In a regular ethernet switch, a packet should never be receive and forwarded to
the same port. Setting the bit allows it to happen.
This is not the same as an ingress MAC loopback. The destination MAC address
has to be stored (learned) in the MCT and associated with the originating source
port. The frame loopback will only work for unicast packets.
Link Heart Beat Receive
0: Disable (Default). Also clears all MAC LHB status.
1: Enable
Soft reset.
0: Normal operation (Default)
1: Reset. Not self clearing.
Reserved
Enable special write to 2 registers in a single write operation.
0: Disable (Default)
1: Enable
Reserved
Frame loopback.
0: Disable frame from sending back to its source port. (Default)
1: Allow frame to send back to its source port
In a regular ethernet switch, a packet should never be receive and forwarded to
the same port. Setting the bit allows it to happen.
This is not the same as an ingress MAC loopback. The destination MAC address
has to be stored (learned) in the MCT and associated with the originating source
port. The frame loopback will only work for unicast packets.
Reserved
Soft reset.
0: Normal operation (Default)
1: Reset. Not self clearing.
Zarlink Semiconductor Inc.
ZL50407
65
Data Sheet