AT32UC3B1128 Atmel Corporation, AT32UC3B1128 Datasheet - Page 447

• Manufacturer Part Number: AT32UC3B1128
• Manufacturer: Atmel Corporation

Specifications of AT32UC3B1128

• Flash (kbytes): 128 Kbytes
• Pin Count: 48
• Max. Operating Frequency: 60 MHz
• Cpu: 32-bit AVR
• # Of Touch Channels: 32
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 28
• Ext Interrupts: 28
• Usb Transceiver: 1
• Usb Speed: Full Speed
• Usb Interface: Device
• Spi: 3
• Twi (i2c): 1
• Uart: 2
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 6
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 32
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0-3.6 or (1.65-1.95+3.0-3.6)
• Operating Voltage (vcc): 3.0-3.6 or (1.65-1.95+3.0-3.6)
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 10
• Output Compare Channels: 16
• Input Capture Channels: 6
• Pwm Channels: 13
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

22.8.3.5
Register Name:
Access Type:
Offset:
Reset Value:
• DMAnINTE: DMA Channel n Interrupt Enable
• PnINTE: Pipe n Interrupt Enable
• HWUPIE: Host Wake-Up Interrupt Enable
• HSOFIE: Host Start of Frame Interrupt Enable
• RXRSMIE: Upstream Resume Received Interrupt Enable
• RSMEDIE: Downstream Resume Sent Interrupt Enable
• RSTIE: USB Reset Sent Interrupt Enable
• DDISCIE: Device Disconnection Interrupt Enable
• DCONNIE: Device Connection Interrupt Enable
32059L–AVR32–01/2012
31
23
15
7
-
-
-
-
This bit is set when the DMAnINTES bit is written to one. This will enable the DMA Channel n Interrupt (DMAnINT).
This bit is cleared when the DMAnINTEC bit is written to one. This will disable the DMA Channel n Interrupt (DMAnINT).
This bit is set when the PnINTES bit is written to one. This will enable the Pipe n Interrupt (PnINT).
This bit is cleared when the PnINTEC bit is written to one. This will disable the Pipe n Interrupt (PnINT).
This bit is set when the HWUPIES bit is written to one. This will enable the Host Wake-up Interrupt (HWUPI).
This bit is cleared when the HWUPIEC bit is written to one. This will disable the Host Wake-up Interrupt (HWUPI).
This bit is set when the HSOFIES bit is written to one. This will enable the Host Start of Frame interrupt (HSOFI).
This bit is cleared when the HSOFIEC bit is written to one. This will disable the Host Start of Frame interrupt (HSOFI).
This bit is set when the RXRSMIES bit is written to one. This will enable the Upstream Resume Received interrupt (RXRSMI).
This bit is cleared when the RXRSMIEC bit is written to one. This will disable the Downstream Resume interrupt (RXRSMI).
This bit is set when the RSMEDIES bit is written to one. This will enable the Downstream Resume interrupt (RSMEDI).
This bit is cleared when the RSMEDIEC bit is written to one. This will disable the Downstream Resume interrupt (RSMEDI).
This bit is set when the RSTIES bit is written to one. This will enable the USB Reset Sent interrupt (RSTI).
This bit is cleared when the RSTIEC bit is written to one. This will disable the USB Reset Sent interrupt (RSTI).
This bit is set when the DDISCIES bit is written to one. This will enable the Device Disconnection interrupt (DDISCI).
This bit is cleared when the DDISCIEC bit is written to one. This will disable the Device Disconnection interrupt (DDISCI).
This bit is set when the DCONNIES bit is written to one. This will enable the Device Connection interrupt (DCONNI).
This bit is cleared when the DCONNIEC bit is written to one. This will disable the Device Connection interrupt (DCONNI).
Host Global Interrupt Enable Register
DMA6INTE
HWUPIE
P6INTE
30
22
14
6
-
UHINTE
Read-Only
0x0410
0x00000000
DMA5INTE
HSOFIE
P5INTE
29
21
13
5
-
DMA4INTE
RXRSMIE
P4INTE
28
20
12
4
-
DMA3INTE
RSMEDIE
P3INTE
27
19
11
3
-
DMA2INTE
P2INTE
RSTIE
26
18
10
2
-
DMA1INTE
DDISCIE
P1INTE
25
17
9
1
-
DCONNIE
P0INTE
24
16
8
0
-
-
447