ISPNANO S3 KIT Equinox Technologies, ISPNANO S3 KIT Datasheet - Page 133

• Manufacturer Part Number: ISPNANO S3 KIT
• Description: ISP PORTABLE PROGRAMMER
• Manufacturer: Equinox Technologies
• Series: -r
• Type: Portable ISPr

Specifications of ISPNANO S3 KIT

• Contents: Programmer, Cables, Power Supply
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: ATMEL AT90S, AT90CAN, AT90USB, ATtiny, ATmega, AT91SAM7xx, Zensys Z-Wave, 24xxx Serial EEPROM's
• Other names: 483-1022; ISPNANO S3 KIT; Q5595084; T1310537

4.9 Measuring the Target Vcc voltage
It is a good idea to measure the ‘Target Vcc’ voltage using EDS as this checks that the wiring and
project settings are correct.
Instructions:
If EDS measures 0V…..
ISPnano Series Programmer - User Manual – V1.11 – 12
Click this
button to
switch
RELAYs ON
EDS should now report a valid voltage for ‘Target Vcc’….
•
•
•
Follow the instructions in section 4.6 to set up the RELAY control etc.
Click the
Click the
below.
button to measure the ‘Target Vcc’ voltage – see screenshot
button in the ‘External Target Vcc Switch’ pane
The programmer may measure 0.00V in the
following conditions:
•
•
•
•
•
•
th
The RELAYs are OFF
No Target System is connected
There is no power on the Target System
The ‘Target Vcc’ is not connected
The programmer measures the voltage
connected to the ‘TVCC’ pin on the ‘Target
ISP Port’ connector.
This should read back the voltage at which
the Target IC is running at.
May 2011
Click this button to
measure the ‘Target Vcc’
voltage
117