W83627EG Nuvoton Technology Corporation of America, W83627EG Datasheet - Page 173

• Manufacturer Part Number: W83627EG
• Description: IC I/O CONTROLLER 128-QFP
• Manufacturer: Nuvoton Technology Corporation of America

Specifications of W83627EG

• Applications: PC's, PDA's
• Interface: LPC
• Voltage - Supply: 3.3V
• Package / Case: 128-XFQFN
• Mounting Type: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10.2.6 EPP Pin Descriptions
10.2.7 EPP Operation
When EPP mode is selected, the PDx bus is in standard or bi-directional mode when no EPP read,
write, or address cycle is being executed. In this situation, all output signals are set by the SPP Control
Port and the direction is controlled by DIR of the Control Port.
A watchdog timer is required to prevent system lockup. The timer indicates that more than 10 μs have
elapsed from the start of the EPP cycle to the time WAIT# is deasserted. The current EPP cycle is
aborted when a time-out occurs. The time-out condition is indicated in status bit 0.
The EPP operates on a two-phase cycle. First, the host selects the register within the device for
subsequent operations. Second, the host performs a series of read and/or write byte operations to the
selected register. Four operations are supported on the EPP: Address Write, Data Write, Address Read,
and Data Read. All operations on the EPP device are performed asynchronously.
NWrite
PD<0:7>
Intr
NWait
PE
Select
NDStrb
Nerror
Ninits
NAStrb
EPP NAME
TYPE
I/O
O
O
O
O
I
I
I
I
I
Denotes read or write operation for address or data.
Bi-directional EPP address and data bus.
Used by peripheral device to interrupt the host.
Inactivated to acknowledge that data transfer is complete. Activated to
indicate that the device is ready for the next transfer.
Paper end; same as SPP mode.
Printer-select status; same as SPP mode.
This signal is active low. It denotes a data read or write operation.
Error; same as SPP mode.
This signal is active low. When it is active, the EPP device is reset to its
initial operating mode.
This signal is active low. It denotes an address read or write operation.
W83627EHF/EF, W83627EHG/EG
- 162 -
EPP DESCRIPTION