INT-1532L-5-M-000 TE Connectivity, INT-1532L-5-M-000 Datasheet - Page 19

• Manufacturer Part Number: INT-1532L-5-M-000
• Description: DIGITAL PANEL METER, 4-DIGIT, 57.7V TO 139V / 100V TO 240V
• Manufacturer: TE Connectivity

Specifications of INT-1532L-5-M-000

• No. Of Digits / Alpha: 4
• Meter Function: Digital
• Meter Range: 0mA To 20mA
• Digit Height: 96mm
• Supply Voltage Range: 57.7V To 139V / 100V To 240V
• Power Consumption: 3W
• Rohs Compliant: NA

Dimensions
Wiring
Input connections are made directly to shrouded screw-clamp terminals. Terminals for
both current and voltage connections are sized to accept two #12 AWG (3mm
2
) solid or
stranded wires. Connections for digital interface, pulsed and analogue options are via
screw-clamp connectors. Connectors offer retained wire protection leaves suitable for
one #13 AWG (2.5mm
2
) solid or stranded wire.
3-phase 3-wire unbalanced load
3-phase 4-wire unbalanced load
-
+
-
+
Import and Export Connections
The connection diagrams shown assume an import power configuration, therefore
power factor is shown as import (IMP) and current will flow towards the load. If current
flows away from the load, in an export power situation, then the power factor
indication will change to export (EXP). As Integra 2000 serves the full four power factor
conditions separate export connections are not required.
Auxiliary Supply
The Integra 2000 should ideally be powered from a dedicated supply, either 100-250V
ac/dc or 12-48V. However the device may be powered the signal source, provided the
source remains within the working range of the chosen auxiliary supply.
Fusing
It is recommended that all voltage lines are fitted with 1 amp fuses.
Safety/Ground Connections
For safety reasons, CT secondary connections should be grounded in accordance with
local regulations.
18