PSB2186N-V11TR Infineon Technologies, PSB2186N-V11TR Datasheet - Page 203

• Manufacturer Part Number: PSB2186N-V11TR
• Description: IC ISDN SUBSCRIB ACCESS 44-PLCC
• Manufacturer: Infineon Technologies

Specifications of PSB2186N-V11TR

• Controller Type: Subscriber Access Controller (ISDN)
• Interface: 4-Wire SPI Serial
• Voltage - Supply: 4.75 V ~ 5.25 V
• Current - Supply: 17mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 44-PLCC
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• Other names: PSB2186N-V11INTR; PSB2186N-V11TR

Low Level Controller
StoreSAPI_ICC ()
StoreSAPI_ICC is used to program a SAPI value in register SAP1 or SAP2 depending on the
function argument value.
RecReady_ICC ()
Sets HDLC receiver ready or not ready depending on the function argument value.
ResetHDLC_ICC ()
ResetHDLC_ICC resets the HDLC controller. Status flags of the local variable ’pt’ indicating
any on-going data transmissions or receptions are reset and memory buffers are released.
SendFrame_ICC ()
SendFrame_ICC initiates the transmission of HDLC frames (S, U, I, UI frames).
A frame can not be sent if the transmit path is still in use, i.e. if the previous transmission is not
finished, if the timer recovery state is indicated (only for I frames) or if the XFIFO is blocked
(STAR:XFW bit).
If the transmission is begun the interrupt handler (Int_ICC) will handle subsequent tasks, for
example shifting remaining data bytes into the XFIFO or calling the MMU to release the
memory buffer.
Loop_ICC ()
Switches testloop at the IOM interface on or off, i.e. connects internally the data upstream and
data downstream lines. This is achieved through setting/resetting the TLP bit in register SPCR.
If the layer-1 part does not deliver clocks while in the deactivated state the clocks will be
enabled when the loop is switched on by means of EnableClk_BASIC. In the Siemens Low
Level Controllers for BASIC access ICs EnableClk_BASIC is a function pointer which
addresses EnaClk_SBC if an ISAC-S or SBC(X) is used. When the loop is switched off the
layer 1 part will return to its normal deactivated state.
Semiconductor Group
203