5535032-5 TE Connectivity, 5535032-5 Datasheet - Page 14

• Manufacturer Part Number: 5535032-5
• Description: ASSY,RECEPTACLE,EUROCARD,TYPE C,LEAD-FRE
• Manufacturer: TE Connectivity
• Series: 5535032 Seriesr
• Type: Type Cr

Specifications of 5535032-5

• Pitch Spacing: 2.54mm
• No. Of Contacts: 96
• Gender: Receptacle
• No. Of Rows: 3
• Rows Loaded: A + B + C
• Contact Termination: Through Hole
• Contact Material: Brass
• Contact Plating: Gold
• Approval: RoHS Compliant
• Number Of Rows: 3
• Number Of Positions / Contacts: 96
• Termination Style: Solder Pin
• Pitch: 2.54 mm
• Connector Type: Connector Assembly
• Pcb Mount Retention: With
• Pcb Mounting Orientation: Vertical
• Pcb Thickness (minimum) (mm [in]): 1.57 [0.062]
• Post Type: Compliant Post
• Size: Standard
• Make First / Break Last: No
• Bus Type: FUTUREBUS, MULTIBUS (II), NUBUS, VMEbus, VXIBus
• Din Level: II
• Mounting Ears: With
• Toolless (flat Rock): Yes
• Termination Post Length (mm [in]): 4.83 [0.190]
• Solder Tail Contact Plating: Tin
• Centerline (mm [in]): 2.54 [0.100]
• Number Of Positions: 96
• Pcb Mount Retention Type: Compliant Posts
• Contact Cross Section (mm [in]): 0.30 x 0.61 [.012 x .024]
• Contact Type: Socket
• Contact Base Material: Copper Alloy
• Contact Plating, Mating Area, Material: DIN 41612 Class 2
• Connector Style: Receptacle
• Housing Material: Polymer
• Ul Flammability Rating: UL 94V-0
• Flux-tight Coating: Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• High Temperature Housing: No
• Lead Free Status / Rohs Status: Details

3.9. Repair
In the event of damaged contacts or connector, the entire connector must be replaced with a new one, with the
exception of the coaxial contacts in Type M connectors which are removable (refer to Paragraph 5.6).
4. QUALIFICATIONS
Eurocard Connectors meet DIN 41612 and IEC 603--2 specifications. The connectors are also Certified by
CSA International in File LR7189 and Recognized under the Component Program of Underwriters Laboratories
Inc. (UL) in File E28476.
5. TOOLING
5.1. Application Tooling
For low--volume manufacturing, an arbor frame type applicator may be used; for high--volume manufacturing,
machine application is recommended. See Figure 13.
Power Units
14 of 18
CAUTION
DANGER
NOTE
C. Drying
When drying cleaned components and pc boards, make certain the temperature limitations of --55_ to
125_C [--70_ to 260_F] are not exceeded.
D. Soldering Guidelines
Refer to Paragraph 2.6 of this specification for instructional material that is available for establishing
soldering guidelines.
i
!
Typical Arbor Frame Press (Such as Greenerd 3A
or 3B Manual Frame Assembly—refer to 408- - 9027
for Adapter Kit when using this type press)
Consideration must be given to toxicity and safety requirements recommended on the Material Safety Data Sheet
furnished by the solvent manufacturer.
If you have a particular solvent that is not listed, consult an TE Representative before using it on these connectors.
Protect lower shroud (vertical connectors) or lower ground plane (enhanced connector) when soldering right- - angle pin
connectors.
SM- - 3 Machine
814700- - 2
Figure 13
“H” Frame Power Unit
Machine 803880- - 6
114- 9014
Rev G