5535032-5 TE Connectivity, 5535032-5 Datasheet - Page 10

• Manufacturer Part Number: 5535032-5
• Description: ASSY,RECEPTACLE,EUROCARD,TYPE C,LEAD-FRE
• Manufacturer: TE Connectivity
• Series: 5535032 Seriesr
• Type: Type Cr

Specifications of 5535032-5

• Pitch Spacing: 2.54mm
• No. Of Contacts: 96
• Gender: Receptacle
• No. Of Rows: 3
• Rows Loaded: A + B + C
• Contact Termination: Through Hole
• Contact Material: Brass
• Contact Plating: Gold
• Approval: RoHS Compliant
• Number Of Rows: 3
• Number Of Positions / Contacts: 96
• Termination Style: Solder Pin
• Pitch: 2.54 mm
• Connector Type: Connector Assembly
• Pcb Mount Retention: With
• Pcb Mounting Orientation: Vertical
• Pcb Thickness (minimum) (mm [in]): 1.57 [0.062]
• Post Type: Compliant Post
• Size: Standard
• Make First / Break Last: No
• Bus Type: FUTUREBUS, MULTIBUS (II), NUBUS, VMEbus, VXIBus
• Din Level: II
• Mounting Ears: With
• Toolless (flat Rock): Yes
• Termination Post Length (mm [in]): 4.83 [0.190]
• Solder Tail Contact Plating: Tin
• Centerline (mm [in]): 2.54 [0.100]
• Number Of Positions: 96
• Pcb Mount Retention Type: Compliant Posts
• Contact Cross Section (mm [in]): 0.30 x 0.61 [.012 x .024]
• Contact Type: Socket
• Contact Base Material: Copper Alloy
• Contact Plating, Mating Area, Material: DIN 41612 Class 2
• Connector Style: Receptacle
• Housing Material: Polymer
• Ul Flammability Rating: UL 94V-0
• Flux-tight Coating: Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• High Temperature Housing: No
• Lead Free Status / Rohs Status: Details

3.7. Mating and Alignment
10 of 18
C. Shrouds
Mating capabilities may be expanded by stacking connectors with the use of a shroud. Shrouds are used
with all 48-- and 96--position, three--row, Type C connectors and all 48-- and 96--position, Type R
connectors with ACTION PIN contacts mounted in pc boards with a thickness of 3.18 mm [.125 in.],
2.36 mm [.093 in.], and 1.57 mm [.062 in.]. Shrouds must be selected according to size (contact positions)
and height (contact length) and are applied manually. Refer to Figure 8.
A. Connector Seating
Seated connectors must be bottomed on the pc board, measured from the top of the connector standoffs
to the pc board, to within the dimension shown in Figure 9.
Connector Seating
PC Board
0.25 [.010]
(Max)
Standoff
Shroud
PC Board
Figure 8
Figure 9
Dust Cover
(Ref)
Pin Connector
114- 9014
Rev G