SI5317A-C-GM Silicon Laboratories Inc, SI5317A-C-GM Datasheet - Page 10

• Manufacturer Part Number: SI5317A-C-GM
• Description: IC CLK JITTER CLEANR PROG 36QFN
• Manufacturer: Silicon Laboratories Inc
• Type: Jitter Cleanerr
• Series: Si5317r

Specifications of SI5317A-C-GM

• Package / Case: 36-QFN
• Pll: Yes with Bypass
• Input: Clock, Crystal
• Output: CML, CMOS, LVDS, LVPECL
• Number Of Circuits: 1
• Ratio - Input:output: 1:2
• Differential - Input:output: Yes/Yes
• Frequency - Max: 710MHz
• Divider/multiplier: No/No
• Voltage - Supply: 1.71 V ~ 3.63 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Frequency-max: 710MHz
• Termination Style: SMD/SMT
• Output Format: LVPECL
• Dimensions: 5 mm W x 7 mm L x 1.85 mm H
• Minimum Operating Temperature: - 40 C
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Product: XO
• Frequency: 10 MHz to 945 MHz
• Frequency Stability: +/- 20 PPM
• Supply Voltage: 3.3 Volts
• Height: 1.85 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 336-1923

Si5317
10
Table 3. Three-Level Input Pins
Input Low Current
Input Mid Current
Input High Current
Notes:
1. The current parameters are the amount of leakage that the 3L inputs can tolerate from an external
2.
3. If a pin is tied to ground or V
4.
driver using the external resistor values indicated in this example. In most designs, an external
resistor voltage divider is recommended.
Resistor packs are only needed if the leakage current of the external driver exceeds the
current specified in Table 2, Iimm. Any resistor pack may be used (e.g.
D10C183J). PCB layout is not critical.
If a pin is left open (no connect), no resistors are needed.
Parameter
DD
1,2,3,4
, no resistors are needed.
Rev. 1.1
–30 µA
–11 µA
Min
—
Panasonic EXB-
–11 µA
–30 µA
Max
—