ISP1504CBS,157 NXP Semiconductors, ISP1504CBS,157 Datasheet - Page 22

• Manufacturer Part Number: ISP1504CBS,157
• Description: RF Transceiver USB2.0 ULPI OTG
• Manufacturer: NXP Semiconductors

Specifications of ISP1504CBS,157

• Number Of Transceivers: 1
• Esd Protection: YeskV
• Operating Supply Voltage (typ): Not RequiredV
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (max): Not RequiredV
• Operating Supply Voltage (min): Not RequiredV
• Pin Count: 32
• Mounting: Surface Mount
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Operating Supply Voltage: 1.65 V to 3.6 V
• Mounting Style: SMD/SMT
• Package / Case: HVQFN-32
• Lead Free Status / RoHS Status: Compliant
• Other names: 935278309157 ISP1504CBS

NXP Semiconductors
ISP1504A_ISP1504C_3
Product data sheet
If a crystal is attached or a clock is driven into the XTAL1 pin, the ISP1504 will drive a
60 MHz clock out from the CLOCK pin when DIR deasserts. This is shown as CLOCK in
Figure
The recommended power-up sequence for the link is as follows:
The ULPI interface is ready for use.
1. The link waits for 1 ms, ignoring all the ULPI pin status.
2. The link may start to detect DIR status level. If DIR is detected as LOW for three clock
cycles, the link may send a RESET command.
6.
Rev. 03 — 7 April 2008
ISP1504A; ISP1504C
ULPI HS USB OTG transceiver
© NXP B.V. 2008. All rights reserved.
21 of 82