PIC24HJ32GP202-E/MM Microchip Technology, PIC24HJ32GP202-E/MM Datasheet - Page 3

• Manufacturer Part Number: PIC24HJ32GP202-E/MM
• Description: 16-bit MCU, 32KB Flash,40 MIPS,nanoWatt 28 QFN-S 6x6mm TUBE
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ32GP202-E/MM

• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (11K x 24)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Operating Range:
• Up to 40 MIPS operation (@ 3.0-3.6V):
• Up to 20 MIPS operation (@ 3.0-3.6V):
High-Performance CPU:
• Modified Harvard architecture
• C compiler optimized instruction set
• 16-bit wide data path
• 24-bit wide instructions
• Linear program memory addressing up to 4M
• Linear data memory addressing up to 64 Kbytes
• 71 base instructions, mostly 1 word/1 cycle
• Sixteen 16-bit General Purpose Registers
• Flexible and powerful addressing modes
• Software stack
• 16 x 16 multiply operations
• 32/16 and 16/16 divide operations
• Up to ±16-bit shifts for up to 40-bit data
Interrupt Controller:
• 5-cycle latency
• Up to 21 available interrupt sources
• Up to three external interrupts
• Seven programmable priority levels
• Four processor exceptions
On-Chip Flash and SRAM:
• Flash program memory (up to 32 Kbytes)
• Data SRAM (2 Kbytes)
• Boot and General Security for Program Flash
© 2011 Microchip Technology Inc.
- Industrial temperature range (-40°C to +85°C)
- Extended temperature range (-40°C to +125°C)
- High temperature range (-40°C to +150°C)
instruction words
High-Performance, 16-bit Microcontrollers
PIC24HJ32GP202/204 and
Digital I/O:
• Peripheral Pin Select Functionality
• Up to 35 programmable digital I/O pins
• Wake-up/Interrupt-on-Change for up to 31 pins
• Output pins can drive from 3.0V to 3.6V
• Up to 5.5V output with open drain configuration on
• 4 mA sink on all I/O pins
System Management:
• Flexible clock options:
• Power-up Timer
• Oscillator Start-up Timer/Stabilizer
• Watchdog Timer with its own RC oscillator
• Fail-Safe Clock Monitor
• Reset by multiple sources
Power Management:
• On-chip 2.5V voltage regulator
• Switch between clock sources in real time
• Idle, Sleep and Doze modes with fast wake-up
Timers/Capture/Compare:
• Timer/Counters, up to three 16-bit timers:
• Input Capture (up to four channels):
• Output Compare (up to two channels):
5V tolerant pins with external pull-up
- External, crystal, resonator, internal RC
- Fully integrated Phase-Locked Loop (PLL)
- Extremely low jitter PLL
- Can pair up to make one 32-bit timer
- One timer runs as Real-Time Clock with
- Programmable prescaler
- Capture on up, down or both edges
- 16-bit capture input functions
- 4-deep FIFO on each capture
- Single or Dual 16-bit Compare mode
- 16-bit Glitchless PWM Mode
external 32.768 kHz oscillator
PIC24HJ16GP304
DS70289G-page 3